Husqvarna 1130ST owner manual To Throw Snow See Fig, To Move Forward and Backward See Fig

Page 11

OPERATION

•Press downward on chute defl ector control lever and move lever forward to lower the defl ector and decrease the distance. Move lever back to raise the defl ector and increase the distance. Be sure lever springs back and locks into desired position.

TO THROW SNOW (See Fig. 15)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

TRACTION DRIVE CONTROL LEVER

AUGER

CONTROL

LEVER

FIG. 15

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

DRIVE SPEED

CONTROL LEVER

FIG. 16

POWER STEERING OPERATION (See Fig. 17)

Steering triggers are used to assist in steering your snow thrower. The triggers are located on the underside of each handle.When a trigger is squeezed, it disengages the drive wheel on that side of snow thrower and allows it to turn in that direction.

•To turn left – squeeze left side trigger.

•To turn right – squeeze right side trigger.

LH TURN

RH TURN

TRIGGER

TRIGGER

FIG. 17

TO ADJUST SKID PLATES (See Fig. 18)

NOTE: The wrench provided in your parts bag may be used to adjust the skid plates.

Skid plates are located on each side of the auger housing and adjust the clearance between the scraper bar and the ground surface. Adjust skid plates evenly to proper height for current surface conditions. For removal of snow in normal conditions, such as a paved driveway or sidewalk, place skid plates in the highest position (lowest scraper clearance) to give a 1/8" clearance between the scraper bar and the ground. Use a middle position if the surface to be cleared is uneven.

NOTE: It is not recommended to operate the snow thrower over gravel or rocky surfaces. Objects such as gravel, rocks or other debris, can easily be picked up and thrown by the impeller, which can cause serious personal injury, property

11 damage or damage to the snow thrower.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 1130ST Static Electricity Hazard TrainingPreparation OperationAPI-SF-SJ Maintenance and Storage16-18 Service and AdjustmentsParts Packed Separately in Carton 14-15Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotater Head See FigInstall Chute Deflector Remote Control See Figs Drive Control OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Power Steering Operation See FigTo Adjust Skid Plates See Fig To Throw Snow See FigTo Start Engine Before Starting the EngineScraper BAR If Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Lubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Repair Parts KEY Part Description Control Panel / Discharge Chute Repair Parts Repair Parts Handles Handles Drive Repair Parts Chassis / Engine / Pullys Repair Parts Wheels / Decals 532 18 78-32 Wheel Assembly, 16, Power Steering, LH Sion Tmita ILD NA SON ITP Eexc 4ON ITC ES Rantywar Tementsta

1130ST specifications

The Husqvarna 1130ST is a powerful and versatile snow blower designed to tackle even the most challenging winter conditions. This machine stands out in the Husqvarna lineup, combining robust performance with advanced technology to make snow clearing an efficient and straightforward task.

At its core, the Husqvarna 1130ST is equipped with a reliable 291cc engine that delivers impressive power. The engine's efficient design ensures optimal fuel consumption while providing the torque necessary for heavy snow removal. This snow blower features a 30-inch clearing width, allowing it to handle significant amounts of snow with ease, while its 21-inch intake height helps it ingest deep snow without bogging down.

One of the key technologies integrated into the 1130ST is its hydrostatic transmission. This feature offers seamless control of forward and reverse speeds, allowing operators to adjust their pace effortlessly while navigating different terrains. The drive system enhances maneuverability, making it ideal for residential driveways, sidewalks, and larger areas that require snow removal.

Another remarkable characteristic of the Husqvarna 1130ST is its two-stage system. The auger collects snow and ice, moving it into the impeller, which then propels it through the discharge chute. This design allows for efficient, high-velocity snow throwing and minimizes clogging, even with wet or heavy snow.

The snow blower’s adjustable skid shoes enhance performance on various surfaces, ensuring that it doesn't damage pavement or grass. In addition to this, the powerful LED headlights improve visibility during early mornings or late evenings, enabling users to operate the machine safely and effectively, regardless of the time of day.

Ergonomically designed controls enhance user comfort, with an easy-to-use dashboard that includes intuitive settings. The handlebars can be adjusted to different heights, providing added comfort for users of all sizes.

Overall, the Husqvarna 1130ST is a reliable choice for homeowners looking for a durable and efficient snow blower. With its powerful engine, user-friendly features, and robust design, it simplifies snow clearing tasks and ensures that winter weather won’t be a hindrance to daily activities. Whether facing a light dusting or heavy snowfall, the Husqvarna 1130ST stands ready to deliver exceptional performance season after season.
Top Page Image Contents