Husqvarna 10530SBEB Install Discharge Chute / Chute Rotater Head See Fig, Check Tire Pressure

Page 7

ASSEMBLY / PRE-OPERATION

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If nec- essary, rotate chute assembly to align square and pin on underside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

INSTALL CHUTE DEFLECTOR REMOTE CONTROL (See Figs. 8 and 9)

1.Install remote cable bracket to discharge chute with 5/16-18 carriage bolt, 5/16 flat washer and 5/16-18 locknut as shown. Tighten securely.

2.Install remote cable eyelet to chute deflector with 1/4-20 shoulder bolt, nylon friction washer and 1/4-20 locknut as shown. Tighten securely.

3.Install spring hooks between hex nuts on chute rotater head and into hole in chute deflector as shown.

CHUTE

SPRING

1/4-20

DEFLECTOR

 

SHOULDER

NYLON

 

BOLT

 

 

WASHER

HOOK BETWEEN

CABLE

 

HEX NUTS

EYELET

 

ON CHUTE

1/4-20

ROTATER HEAD

 

 

LOCK-

 

 

NUT

 

5/16-18

 

 

CARRIAGE

 

 

BOLT

REMOTE

 

 

CABLE

 

 

BRACKET

 

 

FLAT

 

 

WASHER

 

 

5/16-18

 

 

LOCKNUT

 

 

FIG. 8

CHUTE DEFLECTOR

CONTROL LEVER

FIG. 9

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

Reduce tire pressure to 14-17 PSI.

7

Image 7
Contents 10530SBEB Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Know Your Snow Thrower OperationMeets A.N.S.I. Safety Requirements To USE Choke Control See Fig HOW to USE Your Snow ThrowerStopping To USE Fuel SHUT-OFF Valve See FigTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigScraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Lubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Repair Parts Auger Housing / Impeller Assembly Repair Parts Control Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Wheels / Decals KEY Part Description Ionsmitat ILD NA SON Iept EXC4 Onict SE Statementwarranty

10530SBEB specifications

The Husqvarna 10530SBEB is a powerful snow blower designed for both residential and light commercial use, delivering exceptional performance in winter conditions. One of its standout features is the robust 305cc engine that ensures reliable starting and consistent snow-clearing power. This engine provides ample torque, allowing the machine to handle heavy, wet snow with ease.

Equipped with a 30-inch clearing width, the 10530SBEB can efficiently tackle large areas, making it ideal for homeowners with expansive driveways and sidewalks. The high-throw chute can send snow up to 50 feet away, reducing the need for multiple passes and making snow removal quicker and more efficient. The adjustable chute rotation and deflector allow users to direct snow exactly where they want it, providing added flexibility during operation.

The Husqvarna 10530SBEB features an innovative overhead-valve engine design, which contributes to better fuel efficiency and lower emissions. This eco-conscious design aligns with Husqvarna’s commitment to sustainability while still providing high performance. The machine also includes a 6-speed forward and 1-speed reverse transmission, enabling users to choose the optimal speed for various snow conditions.

A major highlight of the 10530SBEB is its augmented throwing capability, aided by the integral turbocharge feature. This technology enhances the snow-throwing distance, making it effective even in heavier snow falls. The machine is also designed with a wide, heavy-duty auger that efficiently breaks up packed snow, ensuring better performance on tough surfaces.

User comfort is prioritized in the Husqvarna 10530SBEB, featuring an ergonomic handle that reduces fatigue during extended use. The handle is also adjustable, accommodating users of different heights. For visibility, the snow blower comes with integrated LED headlights, allowing for safe operation in low-light conditions.

Durability is another key characteristic of the 10530SBEB, with its rugged construction designed to withstand tough winter conditions. The steel housing and reinforced components ensure longevity, while the easily accessible control panel simplifies operation for users of all experience levels.

Overall, the Husqvarna 10530SBEB is a versatile and robust snow blower that combines power, efficiency, and user-friendly features, making it a reliable choice for tackling winter’s challenges. Whether facing light flurries or heavy snowfalls, this model stands out as an excellent tool for snow removal, ensuring that driveways and walkways remain clear and safe.