Billy Goat F091907A owner manual Troubleshooting, Warranty Claim Procedure

Page 13

FORCE BLOWER Owner’s Manual

TROUBLESHOOTING

Problem

Possible Cause

Solution

Abnormal vibration.

· Loose or out of balance impeller.

· Check impeller and replace if required.

 

· Debris in impeller.

· Clear debris with compressed air or a

 

· Loose engine.

backpack blower (see below pictures).*

 

· Check engine.

 

 

 

Engine will not start.

· Engine not in full choke position.

· Check choke position.

 

· Out of gasoline or bad, old gasoline.

· Check gasoline.

 

· Spark Plug wire disconnected.

· Connect spark plug wire.

 

· Gas valve off.

· Turn on gas valve.

 

· Dirty air cleaner.

· Clean or replace air cleaner. Contact a

 

 

qualified service person.

Engine is locked, will not pull

· Engine problem .

· Contact an engine servicing dealer for

over.

 

engine problems.

Aim -N-Shoot TM lever sticking

· Debris stuck around cone

· Clean debis

 

· Cone adjustment knob too tight

· Apply silicone based lubricant to

 

· Adaptor mount nut (item 38) too

pivot points

 

tight

· Loosen manual adjustment knob

 

 

· Loosen nut

*Using compressed air, or a Backpack blower, you can loosen or free debris easily from the impeller and housing, which can cause wear and tear on the machine. You can manually remove debris by taking off the front housing. Note: Always disconnect the sparkplug when servicing.

When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

American Honda: 800-426-7701

Subaru America: 800-277-6246

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows:

•The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer.

•The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

•The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim.

•The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.

•The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received.

•The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding.

For online product registration go to www.billygoat.com

Part No 440021

13

Form No F091907A

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Billy Goat Force Blower About this Manual ContentsSerial Plate Data Specifications F901S F901H F1301HGeneral Safety Instructions and Symbols Form No F091907A Vibration Data SoundIntended USE Engine Labels Instruction LabelsParts BAG Literature Assy Packing ChecklistFigure a AssemblyOperation If Your Unit Fails to Start See Troubleshooting onAdjusting AIR Director Periodic Maintenance MaintenanceWarranty Claim Procedure TroubleshootingIllustrated Parts List F1301H F901H F901S Parts ListMaintenance Record

F091907A specifications

Billy Goat F091907A is a versatile and powerful outdoor equipment designed for both residential and commercial lawn care. This robust machine is primarily known for its exceptional performance in leaf collection and debris management, making it a popular choice among landscapers and property owners alike.

One of the main features of the F091907A is its powerful engine. Equipped with a reliable Honda GX390 engine, it delivers ample power to tackle tough outdoor jobs. This engine is not only efficient but also built for longevity, which significantly reduces maintenance costs and downtime. The unit's impressive suction capabilities are further enhanced by its high-velocity impeller, which effectively mulches leaves and organic debris into manageable pieces.

The F091907A also boasts a spacious collection bag with a large capacity, allowing users to collect a significant amount of debris before needing to empty it. The durable material used in the collection bag is resistant to wear and tear, ensuring it can withstand frequent use in various conditions. The bag features an easy-to-access design that allows for quick emptying, saving users valuable time during extended sessions.

User comfort and ease of operation are also prioritized in the design of the F091907A. The machine is equipped with ergonomic handles that provide a comfortable grip, allowing operators to maneuver it effortlessly across different terrains. The adjustable height feature is notable as it allows users to customize the machine to suit their specific needs, whether tackling uneven ground or reaching tight spots.

In terms of technology, the F091907A is designed with efficiency in mind. Its smart air filtration system ensures optimal engine performance while prolonging engine life by preventing particulates from entering critical components. This feature not only keeps the machine running smoothly but also reduces the environmental impact typically associated with gas-powered equipment.

Finally, the Billy Goat F091907A is built to last. The durable frame and rugged construction materials are designed to withstand tough outdoor conditions, providing users with peace of mind knowing their investment is protected. With its combination of power, efficiency, and user-friendly design, the F091907A stands out as a reliable choice for those seeking top-tier performance in leaf and debris management.
Top Page Image Contents