Ariens C-2014R warranty Replace Attachment Drive Belt

Page 3

Date: February 26, 2014 No. C-2014R

Replaces C-2014

CAUTION: Always support Sno-Thro frame and housing when loosening the cap screws holding them together. Never loosen cap screws while unit is in service position.

IMPORTANT: To avoid bending bottom cover when tipping unit apart, support handlebars firmly or tip unit up on housing and remove bottom cover by removing six cap screws before separating unit.

9.Support Sno-Thro frame and housing.

10.Remove hex bolts securing housing to frame (two on each side). Tip housing and frame apart on pivot pin.

11.Separate housing from unit.

12.Remove attachment drive belt from attachment pulley.

13.Remove attachment pulley and discard. DO NOT reuse pulley.

14.Replace attachment pulley with kit #52001800. Torque to 120 lbs-in.

 

 

5

3

 

 

 

 

1

 

4

 

 

6

 

 

 

2

 

1.

Pinion Gear

 

 

2.

Belt Cover

 

 

3.

Spring Clip Pin

 

 

4.

Chute Crank

 

 

5.

Gear Cover

 

 

6.

Chute Pedestal

Figure 1

 

Replace Attachment Drive Belt

1. Place new belt onto attachment pulley (Figure 2).

NOTE: Engage attachment clutch lever while connecting housing to frame to hold brake out of the way.

2.Tip housing and frame back together and secure with hex bolts.

3.Place belt onto engine sheave.

4.Replace belt finger.

IMPORTANT: With the attachment clutch lever engaged, the belt finger located opposite the belt idler must be less than 1/8" (3.2 mm) from the belt, but not touching the belt, or belt grabbing may occur causing impeller to rotate while the attachment clutch is disengaged (Figure 3).

5. Adjust clutch (see Attachment Clutch/Brake Adjustment on page 5).

WARNING: AVOID INJURY. Auger must stop within 5 seconds when attachment lever is released or serious injury or unit damage may result.

Page 3 of 8

Image 3
Contents 888 927 Date February 26, 2014 No. C-2014R Replaces C-2014Date February 26, 2014 No. C-2014R Replace Attachment Drive Belt RUN-IN Attachment Belt Remove Attachment Cable Slack Attachment CLUTCH/BRAKE AdjustmentDate February 26, 2014 No. C-2014R Replaces C-2014 Attachment Drive Belt Pulley Replacement Power Brushes Models 921025, 921026Replace Attachment Drive Belt Figures 8 Date February 26, 2014 No. C-2014R Replaces C-2014

C-2014R specifications

The Ariens C-2014R is a powerful and versatile piece of machinery that has set high standards in the world of outdoor equipment. Designed primarily for homeowners and professional landscapers, this robust snowblower is engineered to tackle a variety of snow conditions, making it an essential tool in regions that experience heavy snowfall.

One of the standout features of the Ariens C-2014R is its impressive engine. Powered by a durable, high-performance Briggs & Stratton engine, this snowblower can produce ample torque and horsepower, enabling it to clear heavy and wet snow with ease. The reliable engine starts smoothly, thanks to its advanced starting system, ensuring that users can quickly get to work without unnecessary delays.

The C-2014R features a 24-inch clearing width, enabling it to handle substantial amounts of snow at once. This makes it highly efficient for clearing driveways, walkways, and large areas in a relatively short amount of time. The unit is equipped with an adjustable, heavy-duty steel auger that not only breaks up the snow but also propels it effectively through the discharge chute.

Another notable characteristic is its all-wheel drive system, which grants the user excellent maneuverability and traction, even in the most challenging conditions. Coupled with its 6-speed self-propelled transmission, the Ariens C-2014R allows for seamless navigation, whether moving forward or backward. This capability is particularly beneficial on inclines or uneven terrain.

The snowblower's two-stage discharge system is engineered for efficiency, featuring a high-rotation impeller that effectively throws the snow far away from the cleared path. Additionally, the chute can be adjusted easily from the operator's position, allowing for precise snow placement.

Technology-wise, the C-2014R includes an electric start function, providing users with a hassle-free startup experience during cold weather. The ergonomically designed handles ensure comfort during operation, reducing fatigue and promoting control.

Overall, the Ariens C-2014R stands out with its combination of raw power, user-friendly features, and innovative technologies, making it a preferred choice for snow removal enthusiasts looking for reliability and performance in their outdoor equipment. Whether faced with light flurries or heavy snowfalls, the Ariens C-2014R is equipped to meet the challenges of winter head-on.