TOOLS REQUIRED FOR ASSEMBLY
(2)7/16" Wrenches
(2)1/2” Wrenches
(1)3/4” Wrench
(2)15/16” Wrenches
REMOVAL OF PARTS FROM TRACTOR
1.Remove any rear mounted attachments which may be installed on your tractor
2.Mark and save all removed parts.
ASSEMBLING BRACKETS TO TRACTOR
FAST-ATTACH TRACTORS
3. Skip to ASSEMBLING THE BASE
STANDARD FRAME TRACTORS
4.Remove top four bolts from rear of tractor frame. See figure 1.
5.Attach LH and RH adapter brackets to rear of tractor frame using bolts removed in step 4. See figure 2.
R.H. ADAPTER |
BRACKET |
L.H. ADAPTER |
BRACKET |
BOLTS FROM |
TRACTOR FRAME |
FIGURE 1
6.Assemble a shoulder bolt and a 1/2” jam nut to each adapter bracket. See figure 2.
SHOULDER |
BOLT |
1/2" JAM NUT |
1/2" JAM NUT |
SHOULDER |
BOLT |
FIGURE 2
ASSEMBLING THE BASE
7.Assemble the drawbar bracket to the base assembly using four 5/16” x 1” hex bolts, 5/16” lockwashers and 5/16” hex nuts. See figure 3.
8.Attach the tool bracket to the base assembly using four 5/16” x 1” hex bolts, 5/16” lockwashers and 5/16” hex nuts. See figure 3.
TOOL BRACKET
BASE
ASSEMBLY
| DRAWBAR |
| BRACKET |
5/16" x 1" | 5/16" HEX NUT |
| |
HEX BOLT | 5/16" LOCK WASHER |
FIGURE 3
ATTACHING BASE TO TRACTOR
FAST ATTACH TRACTORS
9.Hook the base assembly under the shoulder bolts on the sides the tractor frame using the front notches in the base assembly. Align the hole in the bottom of the base assembly with the hole in the tractor draw- bar. Insert the 5/8” x
5/8" x |
HEX BOLT |
SHOULDER BOLT |
5/8" HEX NUT |
FIGURE 4
4