Polaris Installation Instructions, Pool Cleaner Troubleshooting, and Quick Disconnect Guide

Page 4

English

Quick Installation Instructions

Four quick steps to install and get maximum performance from the Polaris 380:

Install the Universal Wall Fitting (UWF) with Quick Disconnect

Adjust feed hose to fit pool length

Assemble the cleaner

Check for proper wheel RPM (revolutions per minute)

Install the Universal Wall Fitting

1 Installs in minutes on pools with a dedicated cleaner return line and a threaded 1-1/2” female pipe fitting.

1.Turn on the filtration pump and flush out the plumbing line.Turn pump off.

2.Remove the UWF from the Quick Disconnect and screw the UWF with the blue restrictor disc into the return opening.

3.Turn the Quick Disconnect clockwise into the UWF and pull away to secure.

Return Line

Restrictor Disc

Universal Wall Fitting

Filter Screen

Quick Disconnect

Pressure Relief Valve

2

Adjust Feed Hose To Fit Pool Length

 

Measure the deepest part of the pool. Cut leader hose, from end that attaches to feed hose, so length is equal to the greatest depth of the pool.

Attach leader hose to feed hose and connect hose to the pool wall at the return line. Extend hose to farthest point of pool. The hose end must be within 6" – longer or shorter – of the farthest point. See dotted circle.

Hose too long? Separate hose at center swivel. Cut equal amounts of the overage from each 10-foot feed hose section.

Hose too short? Buy an additional feed hose section (part #9-100-3104), one swivel (part #D20) and two hose nuts (part #D15) from an authorized Polaris dealer.

After adjusting hose, position hose floats as shown.

Leader Hose

Length = Max. Depth

Return

 

 

 

Line

dFe Hose Floats

 

 

 

 

 

 

1.5 to t3' apar

Center

Leader Hose Floats

 

 

Swivel

2-3' apart

www.polarispool.com

Image 4
Contents N U a L Always remove the Polaris before swimmers enter the pool For customer service or supportUS and Canada Australia Europe Polaris 380 Complete Cleaner IntroductionQuick Installation Instructions Install the Universal Wall FittingAssemble the Cleaner Check for Proper RPMIf count is less than 28 RPM If count is more than 32 RPMFine Tuning The Polaris Cleaner Routine MaintenanceEnglish Troubleshooting Action Polaris does not back upAction Polaris only turns in one direction Action Feed hose becomes tangledAction The cleaner is running in circles on its side Action The cleaner does not clean the entire poolAction Sweep hose sprays too
Related manuals
Manual 19 pages 22.44 Kb

380 specifications

The Polaris 380 is a standout in the world of automatic pool cleaners, known for its efficiency and advanced technology. Designed to keep both residential and commercial pools sparkling clean, the Polaris 380 offers a combination of performance, durability, and ease of use that makes it a popular choice among pool owners.

One of the main features of the Polaris 380 is its powerful three-wheel drive system. This unique technology allows the cleaner to navigate around the pool with unmatched agility, covering all areas meticulously. With a large suction intake and a strong jet propulsion system, the Polaris 380 effectively removes debris, dirt, and leaves from the pool floor and walls. Its robust design ensures that it can tackle even the toughest cleaning jobs, making it suitable for various pool types, including in-ground pools with a smooth or textured surface.

Equipped with a special filtration system, the Polaris 380 captures both large debris and fine particles, providing a comprehensive cleaning experience. The dual-chamber filtration bag ensures that it can handle a significant amount of debris before needing to be emptied, enhancing convenience for users. This efficient filtration capability allows the Polaris 380 to maintain a cleaner pool environment, reducing the need for additional filtration systems and improving water clarity.

Another admirable characteristic of the Polaris 380 is its ability to operate independently of the pool’s main filtration system. This means that with its own dedicated booster pump, the cleaner works efficiently without putting additional strain on the pool’s existing filtration system. This feature not only prolongs the lifespan of the pool's pump but also enhances overall cleaning efficiency.

Installation of the Polaris 380 is straightforward, requiring minimal setup. The auto-reverse feature allows the cleaner to avoid obstacles and change direction automatically, ensuring that every part of the pool is thoroughly cleaned. Additionally, the Polaris 380 is compatible with various pool shapes and sizes, making it a versatile solution for pool owners looking to maintain a pristine swimming environment.

In conclusion, the Polaris 380 combines advanced cleaning technology, user-friendly features, and efficient performance, making it an excellent investment for anyone seeking to keep their pool clean effortlessly. Its three-wheel drive, powerful filtration, and independent operation set it apart in the competitive landscape of pool cleaners, guaranteeing exceptional results and a hassle-free experience for users.