Trojan 30 owner manual Maintenance, Warranty

Page 7

MAINTENANCE

1.Never store unused material in spreader. Return unused product to its original container.

 

 

Oil Impeller Shaft

2. Wash spreader thoroughly after each use and dry

 

Bearing In Hopper

completely in sun or heated area.

Oil

 

 

 

 

3.Oil the axle bearings, impeller shaft bearing in hopper, control knob in

T-handle.

4.Remove gear cover and wash gears thoroughly. Oil all bearing areas and face of gear teeth. Re- install gear cover.

5.Gear mesh should be checked on a regular basis during high use periods. Clearance between the axle gear and pinion gear should be minimal but not tight. If adjustment is necessary, loosen axle collar

set screw and hold gears together. Slide axle collar

Oil

 

against the gear support and tighten axle collar set

 

 

 

 

 

Axle Collar

 

 

screw. Spin drive wheel. Gears should run freely

 

 

 

 

 

and smoothly.

 

 

 

6.Impeller surface should be cleaned periodically to remove build-up of product. Build-up can cause the spread pattern to change.

7. Tyre pressure should be 20-25 PSI.

 

 

Oil

Oil

 

 

 

 

 

 

 

 

WARRANTY

Sherriff Amenity warrants to Purchaser the following:

1.Product will be free of defects in materials and workmanship for a period of one year from date of purchase.

2.Sherriff Amenity will decide in its reasonable discretion if the part(s)/unit is defective.

3.The spreader or part(s) will be shipped to Sherriff Amenity at the customer expense with a written description of defect to the attention of Sherriff Amenity’s WARRANTY DEPARTMENT.

4.If the spreader is used for commercial rental the Limited Warranty shall be limited to a period of 90 days.

5.All Unit and part replacement will be performed at the reasonable discretion of Sherriff Amenity .

6.Labor charges are not covered and the unit need not be returned to the dealer for warranty service.

7.Proof of purchase must be supplied to Sherriff Amenity .

Sherriff Amenity's sole obligation under this warranty is limited to repairing or replacing the defective part. Upon replacement of any Product or Product part, the replaced item

shall become the property of Sherriff Amenity . If Sherriff Amenity determines that the Product covered by this warranty requires service, Sherriff Amenity shall prepay return shipping charges from Sherriff Amenity .

In all other instances, such charges shall be paid by Purchaser. Except for loss or damage caused by Sherriff Amenity's negligence, Purchaser relieves Sherriff Amenity of responsibility for all risks of loss or damage to the Product and its parts during the period the products are in transit to and from Sherriff Amenity .

This warranty does not extend to any Product or parts thereof that have been allowed to corrode, subjected to misuse, neglect, accident, or modification by anyone

other than Sherriff Amenity or that have been affixed to any nonstandard accessory attachment or that have been used, stored, installed, maintained or operated in violation

of Sherriff Amenity ’s instructions or standard industry practice. No agent, employee or representative of Sherriff Amenity has any authority to bind Sherriff Amenity to any affirmation, representation or warranty concerning the Product and any affirmation, representation or warranty made by any agent, employee or representative shall not be enforceable by Purchaser.

THIS WARRANTY EXTENDS ONLY TO THE ORIGINAL PURCHASER AND IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS OR INTENDED USE FOR A

PARTICULAR PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF Sherriff Amenity .

SHERRIFF AMENITY SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL LOSS, DAMAGE OR EXPENSE DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF ANY OF THE PRODUCT INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS OF OTHER PROPERTY OR EQUIPMENT,LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF PURCHASER.

Image 7
Contents Page Assembly Install handle grips onto the handle Operation Effective Pattern Width HOW to Determine Spreader Settings and Spread WidthSetting Rate Setting ConversionWarranty MaintenanceParts List

30 specifications

Trojan 30 is an innovative vessel that belongs to the realm of high-performance motorboats, designed specifically for seafaring enthusiasts who seek both luxury and functionality. With a length of 30 feet, this model embodies the perfect balance between size and maneuverability, making it well-suited for a variety of maritime activities, including day cruising, fishing, and water sports.

One of the standout features of the Trojan 30 is its robust hull design, constructed with high-quality fiberglass materials. This not only ensures exceptional durability but also allows for superior performance in various sea conditions. The deep-V hull provides enhanced stability and better handling, enabling smooth navigation through waves, which is critical for a pleasurable boating experience.

In terms of power, the Trojan 30 is equipped with a formidable engine, typically a powerful inboard motor, which allows for swift acceleration and impressive top speeds. This performance is complemented by an advanced propulsion system that enhances fuel efficiency, ensuring that the vessel can cover considerable distances without requiring frequent refueling. As a result, the Trojan 30 is not only thrilling to drive but also economical for those long days on the water.

The interior of the Trojan 30 reflects a commitment to comfort and style. It features a well-appointed cabin with ample space for relaxation and entertainment. The design includes plush seating, a well-equipped galley, and a bathroom, making it suitable for extended outings. Large windows offer panoramic views and natural light, creating an inviting atmosphere within the vessel.

Safety is also a priority in the design of the Trojan 30. The boat is equipped with essential safety features including a navigational system with GPS, on-board fire extinguishers, and sturdy railings to ensure secure handling while at sea. Additionally, its unsinkable design provides peace of mind for both the captain and passengers.

Modern technologies integrated into the Trojan 30 further elevate the boating experience. This includes advanced navigation systems, Bluetooth connectivity for audio streaming, and even smart controls for seamless operation of onboard systems.

In summary, the Trojan 30 excels in performance, comfort, and safety, making it a top choice for boaters seeking a versatile and luxurious vessel to conquer the waters. Its combination of cutting-edge technologies and thoughtful design ensures it stands out in the competitive market of recreational boats.