Instructions for ATV Spreader

THANK YOU for your purchase of the ATV Spreader, a top quality Moultrie product. Please read both sides of this sheet before operating this unit. if you should have any questions about this or any other Moultrie product, please contact us using the information on the revere side.

To help us better serve you, please complete and mail the enclosed Warranty Card.

MOUNTING BRACKET TO ATV RACK

Using provided Nuts, Washers and U-Bolts, connect the Mounting Bracket to the rack of the ATV as shown.

NOTE: Oblong hole should be at top.

U-Bolt

ATV Rack	Mounting
	Mounting
	Bracket

CONNECTING THE SPREADER

When sliding Feedgate Arm through oblong hole, align the holes on the Mounting Bracket with the holes on the frame of the Spreader. Slide the two Hitch Pins through both of the holes and secure with Cotter Pins as shown.

Align holes

Cotter Pins

Hitch Pins Spreader Frame

ATTACHING SUPPORT STRAP

Slide a 6’x 1” Ratcheting Tie-Down Strap through Metal Loop on back of ATV frame. Place S hooks of ratchet strap around front of ATV rack. Adjust tension strap until firm.

Metal Loop

Ratcheting Tension

Adjustment

Tie-Down

Strap

Strap S hooks