Warranty, Do not Return to Dealer for Repair

17. For normal operation both plates should be fully opened. To reduce flow to the left side, partially or completely close the plate over the rear (large) hole. To reduce flow to the right side, partially or completely close the plate over the front (small) hole. Close both plates for a narrow center spread pat- tern. WARNING: If the optional side de- flector is being used in the down position, the plate over the rear (large) hole MUST BE CLOSED or an over application of material will occur.

16.Tension on the flow control lever may be adjusted by tightening or loosening the tension nut as shown.

The settings furnished on the Rate Setting Chart are intended as a guide only. Variations in physical characteristics of material applied, walking speed, and roughness of ground surface may require slightly different spreader settings. Due to the above conditions, EARTH- WAY PRODUCTS, INC. makes no warranty as to the uniformity of coverage actually obtained from the settings listed.

WARRANTY

EARTHWAY guarantees this product to be free of defects in origi- nal workmanship and materials for a period of 90-days from sale to the original user. If any defect develops during this period EARTHWAY will repair or replace this product at no charge pro- vided the defect is not the result of mishandling or tampering and that this product is received at the factory with shipping charges prepaid. For quicker service you may call EARTHWAY at 574- 848-7491 or write and describe the nature of the defect and we will send repair parts to you. Due to the corrosive nature of most fertil- izers and ice melters, EARTHWAY PRODUCTS, INC. makes no warranty or guarantee against corrosion failure on models with plated steel or painted steel frames. Clean your spreader well after each use. Warranty covers parts only, but not labor charges.

DO NOT RETURN TO DEALER FOR REPAIR

OPERATING INSTRUCTIONS

Before filling hopper, become familiar with the operation of this spreader.

Obtain proper setting for material to be used from the RATE SETTING CHART included with this spreader. Move stop bolt on rate gauge assembly to the proper setting.

While pushing spreader forward, pull control lever back to stop bolt.

To stop, push lever forward to close flow holes before you stop moving.

When finished, empty any remaining material from hop- per.

Thoroughly wash spreader and allow to dry before stor- ing. No oiling is necessary.

EARTHWAY PRODUCTS, INC.

1009 Maple Street

P.O. Box 547

Bristol, IN 46507

FOR YOUR RECORDS

_________________________________________

Date Purchased

_________________________________________

Store Name

HOW TO ORDER SPARE PARTS

All spare parts listed herein may be ordered direct from the manufacturer, EARTHWAY PRODUCTS, INC.

Be sure to give the following information when ordering. 1. Model Number

2.Part Number

3.Part Description

Call (574) 848-7491 or write for current prices.

PAGE 5

M24SSD specifications

The Hitachi M24SSD is a high-performance solid-state drive that has garnered attention for its innovative features and advanced technologies. Designed to meet the demands of modern computing environments, the M24SSD is particularly well-suited for applications requiring high-speed data transfer, reliability, and efficiency.

One of the standout features of the Hitachi M24SSD is its impressive data transfer speeds. This SSD utilizes a SATA III interface, which allows for maximum read and write speeds of up to 550 MB/s and 520 MB/s, respectively. Such performance is crucial for users who rely on fast boot times and quick file access, making it an ideal choice for both personal computing and enterprise-level solutions.

In addition to its speed, the M24SSD is engineered with power efficiency in mind. It consumes significantly less power compared to traditional hard disk drives (HDDs), resulting in longer battery life for laptops and reduced energy costs for large data centers. This is an important consideration in today's eco-conscious environment, where energy savings can translate into substantial cost reductions.

The Hitachi M24SSD also excels in durability and reliability. It incorporates advanced wear-leveling technology and error-correcting code (ECC) functionality, which help to extend the drive's lifespan and maintain data integrity. These features ensure that the SSD can withstand the rigors of continuous use, making it suitable for applications that demand consistent performance over time.

Furthermore, the M24SSD supports various storage management protocols, such as TRIM and S.M.A.R.T, which enhance its longevity and performance. TRIM commands contribute to improved garbage collection, allowing the SSD to operate at peak efficiency by managing unused data blocks expertly. S.M.A.R.T, on the other hand, provides users with essential information about the drive's health and potential issues, enabling proactive maintenance or timely upgrades.

In summary, the Hitachi M24SSD stands out as a robust, high-performance SSD that offers excellent speed, efficiency, and reliability. With features designed to meet the demands of contemporary computing, it represents a solid investment for anyone looking to enhance their storage solutions. Whether for personal use or large-scale enterprise applications, the Hitachi M24SSD delivers the performance and durability that users need in today's fast-paced digital landscape.