Assembly, X Drive Wheel | Anderson Manufacturing SS-2 specification

Assembly

	Handle Brace
Leg	Locknut
1/4 - 20 X 1/2”

1Remove spreader and components from carton. Place hopper on its front panel, insert two 1/4-20 X 1/2” hex head bolts through the leg; flattened end of handle brace and holes in hopper as shown.

Install hex locknuts but do not tighten. Repeat on opposite side.

3/16 x 2”

Drive Wheel

2Slide wheels onto each end of axle with the longer portion of the wheel facing the hopper. Secure wheels with 3/16 dia. x 2” cotter pins.

Locknut

1/4 - 20 x 1 1/2 “ Hex Bolt

3Install control tube between the control tube braces and secure with two 1/4-20 X 1 1/2” hex bolt and locknuts.

Curved	Handle Lever
Curved	Assembly	Handle Grip
Washers

1/4 - 20 X 1/2” Hex Bolt

	Locknut	1/4” - D. Clevis
	Locknut	Cotter Pin
		Cotter Pin

Stand spreader upright on wheels. Attach

4 upper handle assembly to handle brace (make sure handle is positioned as shown) using four 1/4-20 X 1 1/2” hex bolts, eight curved wash-

ers, and four locknuts. Tighten securely. Install handle grips onto upper handle. Slide handle lever assembly between handle brackets and secure with 1/4 diameter clevis and cotter pin. Make sure lever pivots freely.

1/4” D. Clevis	Hopper Handle
	1/4 - 20 x 1/2”	Locknut

Cotter Pin

Cotter

Control Tube

5Slide the ends of the control tube braces over the studs on the shutoff bar brackets; secure with cotter pins. Attach opposite end of control tube to the handle lever using 1/4 diameter cle-

vis and cotter pin. Make sure handle lever operates freely. Tighten all Nuts left loose in Step #1. Install hopper handle on front of spreader using two 1/4-20 X 1/2” hex bolts and locknuts.

6To check spreader for completed shutoff, pull the handle lever back to the “OFF” position. Turn spreader over to see if the shutoff bar completely covers the holes in the bottom of the

hopper. If not, stand the spreader upright on wheels and push the handle lever forward to the “ON” position. Loosen the bolts in the hopper holding the handle brace. Push down on the handle brace and the front of the Hopper. Retighten bolts and check the shutoff.

SS-2 specifications

Anderson Manufacturing has made a significant mark in the competitive landscape of firearms with its SS-2 model, a versatile and reliable semi-automatic rifle that has gained popularity among enthusiasts, sport shooters, and professionals alike. Built on a solid foundation of innovation and craftsmanship, the SS-2 showcases a blend of modern technologies and features.

One standout characteristic of the SS-2 is its lightweight design, which enhances maneuverability without sacrificing durability. The rifle is constructed from high-quality materials that ensure long-lasting performance, even under rigorous conditions. The upper and lower receivers are made from forged aluminum, providing the needed strength while keeping the overall weight manageable.

The SS-2 is chambered in .223 Remington or 5.56 NATO, making it suitable for various shooting applications, from target practice to home defense. The rifle features a free-floating handguard, allowing for improved accuracy by reducing potential interference from mounting accessories. This design minimizes barrel contact, ensuring that every shot is as precise as possible.

Incorporating advanced technologies, the SS-2 is equipped with an adjustable gas system, enabling users to fine-tune the operating system to their preferences and the ammunition being used. This adaptability contributes to the rifle's reliability and enhances the shooting experience, especially when employing different loads or in varying environmental conditions.

The SS-2 also comes with an ambidextrous safety selector and magazine release, catering to both left and right-handed shooters. This thoughtful feature makes the rifle more accessible, promoting ease of use for a broader audience. Additionally, the adjustable stock offers a customizable fit, ensuring shooters can find an optimal shoulder position for enhanced comfort and control.

An integral part of the SS-2’s appeal is its modularity, allowing users to personalize the rifle with a wide range of accessories. Whether it's optics, grips, or lights, the rifle accommodates various aftermarket components to tailor it to individual shooting styles and needs.

Overall, the Anderson Manufacturing SS-2 stands out in today’s firearms market, reflecting a commitment to quality and innovation. With its combination of lightweight construction, adjustable features, and adaptability, the SS-2 is poised to meet the demands of modern shooters, making it a noteworthy addition to any firearm collection.