Installation | Operation |
|
|
Fiber Channel Speed
The ATCA−S100 provides one discrete sensor that allow to set the speeds of the two on−board fiber channels. The sensor is assigned to both fiber channels. The sensor determines the same speed both fiber channels. Two different speeds are possible: low (1 GBit/s) and high (2 GBit/s).a
Since the two ports of each on−board hard disk always run at the same speed, both fiber channels must be set to the same speed. The hard disk fiber channel interface speed automatically adapts to the selected fiber channel speed.a
For details about sensor number, sensor name and the assigned SFP refer to theaATCA−S100: Control via IPMI, Preliminary Reference Guide.aa
38 | ATCA−S100 |