Havis-Shields manual Install Instructions C-TCB-21, Telescoping Computer Base Dodge Durango

INSTALL INSTRUCTIONS C-TCB-21

TELESCOPING COMPUTER BASE

1998-2003 DODGE DURANGO

TOOLS REQUIRED:
3/16” Allen wrench		Ratcheting wrench (3/8” drive)
3/8” Standard socket set		Powered drill w/ 3/16” drill bit
3/8” Metric socket set		Open-end wrench set
HARDWARE & COMPONENTS:
QTY	DESCRIPTION	PART #
1	Pole support assembly	CM93071-21
1	Telescoping pole assembly	CM93072-3
1	Side support brace	CM93146
1	5/16-18 Nylock nut	GSM30017
1	5/16” Flat washer	GSM31006
2	¼” x 1” Hex head lag bolts	GSM33060

Always!

Read all instructions before installing any Havis-Shields Equipment Corp products. Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! Use hardware provided with install kit

	Side support
	brace
	¼” x 1”Hex
Telescoping pole	head lag bolts
assembly
Pole support	5/16-18
assembly
	Nylock nut

Location of passenger side factory

seat base bolts

C-TCB-21-INST-12-04