Fluke 196C user manual Maintaining the Test Tool, Cleaning the Test Tool, Storing the Test Tool

Page 85

About this Chapter

This chapter covers basic maintenance procedures that can be performed by the user. For complete service, disassembly, repair, and calibration information, see the Service Manual. You will find the part number of the Service Manual in the section “Parts and Accessories” in this chapter.

Chapter 8

Maintaining the Test Tool

Cleaning the Test Tool

Clean the test tool with a damp cloth and a mild soap. Do not use abrasives, solvents, or alcohol. These may damage the text on the test tool.

Storing the Test Tool

If you are storing the test tool for an extended period of time, charge the NiMH (Nickel-Metal Hydride) batteries before storing.

77

Page 84 Page 86
Image 85
Page 84 Page 86
Contents Fluke 196C/199C Page Limited Warranty & Limitation of Liability Service Centers Table of Contents Using The Recorder Functions Using The MultimeterUsing Replay, Zoom and Cursors Fluke 196C/199CIii Specifications Manufacturer Declaration of ConformityStatement of Conformity Sample testsScopeMeter Test Tool Kit Unpacking the Test Tool Kit# Description Battery Charger country dependentSafety Information Read First Safety Information Read First Use of the test tool in a manner not specified may If Safety Features are ImpairedImpair the protection provided by the equipment Powering the Test Tool Using The ScopeAbout this Chapter Screen After Reset Resetting the Test ToolOpen the Waveform Options Navigating a MenuInput Connections Hiding Key Labels and MenusScope Connections Making Scope ConnectionsScreen After an Auto Set Displaying an Unknown Signal with Connect-and-ViewMaking Automatic Scope Measurements Hz and V peak-peak as Scope Readings Freezing the ScreenUsing Average for Smoothing Waveforms Using Average, Persistence and Glitch CaptureOpen the Waveform Options menu Persistence... menu Using Persistence to Display WaveformsDigital Persistence Infinite Envelope OffSuppressing High Frequency Noise Displaying GlitchesSelecting AC-Coupling Acquiring WaveformsReversing the Polarity of the Displayed Waveform Open the Input a Options Variable Input SensitivityMenu Select and accept VariableWorking with Noisy Waveforms Using Waveform Mathematics FunctionsSelect 10kHz HF reject to Comparing Waveforms Analyzing Waveforms Making Meter Connections Using The MultimeterMeasuring Resistance Values Making Multimeter MeasurementsOpen the Measurement menu Making a Current MeasurementHighlight a ac Open the Current ProbeAmpere Measurement Readings Selecting Auto/Manual Ranges Freezing the ReadingsActivate manual ranging Increase or decrease the rangeMaking a Relative Measurement Making Relative MeasurementsOpening the Recorder Main Menu Using The Recorder FunctionsStarting a TrendPlot Function Plotting Measurements Over Time TrendPlotHighlight Trend Plot Scope TrendPlot Reading Displaying Recorded DataTurning Off the TrendPlot Display Changing the Recorder OptionsOpen the Recorder Options Exit the recorder functionStarting a Scope Record Function Recording Scope Waveforms In Deep Memory Scope RecordHighlight Scope Record Using ScopeRecord in Single Sweep Mode Using External Triggering to Start or Stop Scope Record Triggered Single Sweep Recording Analyzing a TrendPlot or Scope RecordReplaying the 100 Most Recent Scope Screens Using Replay, Zoom and CursorsReplaying a Waveform Replaying Step-by-StepTurning Off the Replay Function Replaying ContinuouslyCapturing 100 Intermittents Automatically Zooming in a Waveform Zooming in on a WaveformTurning Off the Zoom Function Displaying the Zoomed WaveformMaking Cursor Measurements Using Horizontal Cursors on a WaveformTurn off the cursors Using Vertical Cursors on a WaveformMaking Rise Time Measurements Using Cursors on a A+B, A-B or A*B WaveformTriggering on Waveforms Screen with all Trigger Information Adjust the trigger level Setting Trigger Level and SlopeTrigger Delay or Pre-trigger View Using Trigger Delay or Pre-triggerOpen the Trigger Options menu Automatic Trigger OptionsOpen the Automatic Trigger Open the Trigger Options menu Open the Trigger on Edge menu Triggering on EdgesSelect Free Run, jump to Noise Reject FilterMaking a Single Acquisition Triggering on Noisy WaveformsMaking a Single Shot Measurement Select 1.2V under the Ext Level Triggering on External WaveformsLabel Select Video on a to open Triggering on Video SignalsTrigger on Video menu Triggering on Video Frames Enable video line selectionTriggering on Video Lines Choose FieldDetecting Narrow Pulses Triggering on PulsesSelect Pulse Width on A... to Open the Trigger on Pulse WidthTip Finding Missing Pulses Triggering on Missing Pulses Saving and Recalling Using Memory, PC and PrinterHighlight SCREEN+SETUP location Saving Screens with Associated SetupsDisplay the SAVE/PRINT key labels Save the actual screenOpen the Recall menu Recalling a Setup Configuration Documenting Screens Connecting to a ComputerViewing Stored Screens Open the View... menuConnecting a Serial Printer Connecting to a PrinterOpen the Printer Setup submenu Setting up the Printing ConfigurationPrinting a Screen Baud RateFluke 196C/199C Tips Using the Standard AccessoriesHeavy Duty Fixed Connections for Scope Probing Using 2-mm Heavy Duty Test ProbesTips Measuring Using Independently Floating Isolated Inputs Using the Independently Floating Isolated InputsParasitic capacitance between analog Digital reference Suppressing Key Labels and Menu’s Using the Tilt StandTurn the test tool off Press and holdChanging the Information Language Adjusting the Contrast and BrightnessOpen the Language Select Accept French as the languageChanging the Display Color Open Display Options menu Open Date Adjust menuChanging Date and Time Setting the Power Down Timer Saving Battery LifeChanging the Auto Set Options Open the Auto Set Adjust menuTo Coupling Select UnchangedMaintaining the Test Tool Cleaning the Test ToolStoring the Test Tool Charging the Batteries Charging the BatteriesStart the refresh cycle Extending Battery Operation TimeCalibrating the Voltage Probes Replacing the NiMH Battery Pack BP190Start the probe calibration Maintaining the Test ToolStandard Accessories Parts and AccessoriesDisplaying Calibration Information Open the Version & CalibrationStandard Accessories Ordering Code TL24 General Purpose Leads Ordering CodeOrdering Code SW90W Optional AccessoriesTroubleshooting FlukeView Does Not Recognize The Test Tool Battery Operated Fluke Accessories Do Not FunctionPerformance Characteristics SpecificationsSafety Characteristics IntroductionIsolated Inputs a and B Vertical Dual Input OscilloscopeHorizontal Automatic Connect-and-View Trigger Trigger and DelayEdge Trigger Isolated External TriggerAutomatic Scope Measurements AC+DC Voltage True RMS AC Voltage VACPeak Amperes AMPFrequency Hz Duty Cycle DutyPhase PowerTemperature Temp Decibel dBDMM Measurements on Meter Inputs MeterDiode TrendPlot Meter or Scope RecorderScope Record Miscellaneous Zoom, Replay and CursorsMemory Probe CalibrationOptical InterfacePort MechanicalEnvironmental Max. Input Voltages SafetyMax. Floating Voltage Electrical specifications SafetyProbe Environmental104 Electromagnetic Immunity 106 Average Index108 Max. Floating Voltage, 102, 103 Max. Input Voltage 110

196C specifications

The Fluke 196C is a sophisticated digital oscilloscope designed for a multitude of applications in the electronics and electrical engineering fields. Known for its high performance and user-friendly interface, the 196C is a popular choice among professionals who require reliable and accurate measurements. This model is particularly valued for its ability to capture both fast and slow signals with precision, making it suitable for a wide range of testing and troubleshooting tasks.

One of the standout features of the Fluke 196C is its color display, which offers a 7.5-inch screen with stunning resolution. The display provides a clear and detailed view of waveforms, allowing users to analyze results quickly and effectively. The color-coded waveforms enhance visual clarity and differentiation, making it easier to identify issues in complex signals.

The 196C utilizes advanced digital signal processing technology to offer a bandwidth of 200 MHz and a maximum sampling rate of 1 GS/s. This high bandwidth ensures that it can capture high-frequency signals accurately, making it an ideal tool for testing high-speed circuits. Additionally, the oscilloscope supports up to 2 million points of waveform memory, which allows for prolonged capture times and detailed waveform analysis.

Another significant feature is the multi-channel capability of the 196C, which allows users to connect and analyze multiple signals simultaneously. This is particularly useful in scenarios where comparative analysis is required, such as when debugging interconnected circuits. It supports four input channels, ensuring that complex tests can be performed without needing to switch connections repeatedly.

The Fluke 196C is also equipped with a variety of measurement and analysis tools that enhance its functionality. Automatic measurements can be taken to assess parameters such as frequency, amplitude, and rise time, reducing the chances of human error. The built-in FFT (Fast Fourier Transform) functionality enables users to perform frequency domain analysis, facilitating deeper insights into signal behavior.

Moreover, the 196C offers extensive connectivity options, including USB and Ethernet interfaces. This allows for easy data transfer and remote access, enhancing collaboration among teams and facilitating documentation of results.

In summary, the Fluke 196C digital oscilloscope combines high-performance specifications, an intuitive interface, and powerful analysis features to deliver a versatile tool for engineers and technicians. Its advanced technologies and user-friendly design make it an indispensable asset for effective electronic diagnostics.
Top Page Image Contents