Boston Acoustics Guide to MCS 100 - Subwoofer Setup and Maintenance

Page 5

Subwoofer Controls

Power On

Plug the subwoofer’s AC cord into a wall outlet. We do not recommend using use the outlets on the back of the receiver. The subwoofer features auto on/standby. An LED indicator next to the volume control indicates what mode the subwoofer is in.

RED = STANDBY (No signal detected, Amp Off )

GREEN = ON (Signal detected, Amp On)

LED indicator

The subwoofer will automatically enter the Standby mode after several minutes when no signal is detected from your system. The subwoofer will then power ON instantly when a signal is detected.

Volume Control

Begin by adjusting the Subwoofer Volume Control to the 11 o’clock position. Further adjust the Subwoofer Volume Control until you hear a match in volume between the main speakers and subwoofer. Ideally, bass response should not overpower the room but rather be adjusted so there is a natural blend across the entire musical range.

Operation

When using the MCS 100 in a Dolby® Digital or DTShome theater system, make sure all speakers are set to “Small”. When using the system in a Dolby Pro Logic® home theater system, make sure the receiver’s center channel mode is set to “Normal.”

Some Dolby Digital equipped receivers/processors offer different setup options for each source or surround mode (e.g., CD- stereo, videotape, Dolby Digital, Pro Logic®). In each case, follow your equipment’s instructions to ensure that the subwoofer output is turned on and that the speakers are set to “Small” in each mode.

If your receiver has adjustable crossover settings, we recommend the subwoofer crossover be set at 150Hz.

Refer to the owner’s manual for your AV receiver for any additional recommendations on system operation.

Maintenance and Service

The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust. All wiring connections should be inspected and cleaned or remade at least once a year.

If a problem does occur, make sure that all connections are properly made, secure and clean. If a problem occurs in one loud- speaker, rewire that speaker in a different location within the system. Should the problem persist in this speaker the problem is within the speaker. If the speaker sounds fine in the new position it is a strong indication of a more in depth issue with the electronics in the system. In the event that your MCS 100 ever needs service, contact your local Boston Acoustics dealer or visit www.Bostona.com for a list of dealers in your area.

If your subwoofer does not play, check that all the connectors on the cables are making proper contact and that the AC plug is connected to a “live” receptacle.

Image 5
Contents Horizon MCS Important Safety Instructions Unpacking the System SpecificationsMCS 100 Introduction Subwoofer Connections Placement OptionsSpeaker Connections LED indicator Maintenance and ServiceSubwoofer Controls OperationFor EU Customers Only Limited WarrantyIf Service Seems Necessary Jubilee Drive, Peabody, MA 01960 USA

Horizon MCS 100 specifications

The Boston Acoustics Horizon MCS 100 is a versatile home theater speaker system that delivers an impressive audio performance, catering to both music enthusiasts and casual listeners alike. Featuring a compact design, the MCS 100 is ideal for smaller spaces without compromising sound quality. This well-engineered system incorporates advanced technologies that produce clear, dynamic sound across various listening environments.

At the heart of the MCS 100 system are its key components, which include a powered subwoofer and two compact satellite speakers. The powered subwoofer is crucial for delivering deep, rich bass tones that enhance any movie or music experience. With an amplifier built-in, the subwoofer ensures powerful low-frequency reproduction, adding depth and dimension to soundtracks and musical performances.

The satellite speakers of the MCS 100 utilize Boston Acoustics’ proprietary technologies to achieve exceptional performance. These speakers feature high-quality drivers that are designed to provide clear dialogue and articulate highs, ensuring that every nuance of sound is captured. The compact size of these satellites allows for easy placement in a variety of rooms, making them a flexible option for any home theater setup.

One of the standout features of the Horizon MCS 100 system is its compatibility with a wide range of audio equipment. Whether it’s used with a traditional receiver or a modern streaming device, this speaker system integrates seamlessly with your existing setup. This versatility is complemented by the sleek design of the speakers, which allows them to blend in with your decor while still delivering a stylish aesthetic.

Another key characteristic of the MCS 100 is its sound staging capabilities. The speakers are engineered to create a cohesive sound field that enhances the immersion of movies and music. The combination of the subwoofer and satellites allows for a more engaging listening experience, whether you’re watching an action-packed film or enjoying a live concert recording.

In summary, the Boston Acoustics Horizon MCS 100 speaker system represents an excellent choice for those seeking an immersive audio experience in a compact format. With its powerful subwoofer, high-quality satellite speakers, and versatile compatibility, this system fulfills the need for both performance and aesthetic appeal in home entertainment.