Attaching Accessories
Your Telescope is now Fully Assembled
Now remove the dust cover from the front of the telescope tube. Be careful not to touch the glass lens.
AutoStarGETTING#497 HANDBOXSTARTED
Be sure the telescope master power switch is in the off position. Remove the LT Series handbox and the coiled interface cable from the packing materials. Plug one end into the HBX port of the control panel and plug the other end into the Handbox port on the LT Series handbox.
Rear Cell Thread |
| Eyepiece Holder |
Dust Cap |
| Diagonal Prism |
Flip the Power Switch on the computer control panel to the ON position. The copyright message lights on AutoStar’s LCD display.
Slew Speeds:
Speed 9: Fast | Arrow |
. | |
. | Keys |
. |
|
Speed 5: Medium |
|
. |
|
. |
|
. |
|
Speed 1: Slow |
|
| Number |
| Keys |
Remove the dust cap from the rear cell of the | “Press 0 to align or Mode for Menu” displays. You |
| |||||
can use the Arrow keys to slew (move) the telescope |
| ||||||
telescope. Thread the 1.25" eyepiece holder | onto |
| |||||
up, down, right, or left. To change the telescope’s slew |
| ||||||
the rear cell thread. Slide the diagonal prism | into |
| |||||
speed, press a Number key. “9” is the fastest speed |
| ||||||
the eyepiece holder and lock in place by turning the |
| ||||||
and “1” is the slowest speed. See page 20 for more |
| ||||||
thumbscrew to a firm feel. Place the Super Plössl |
| ||||||
details. Or you can Press “0” to begin Easy Alignment. |
| ||||||
26mm eyepiece into the diagonal prism and tighten the |
| ||||||
See page 11 for more information. |
| ||||||
diagonal prism thumbscrew to a firm feel only. |
|
| |||||
|
|
|
| 7 | |||
|
|
| INDEX |
|
| ||
|
|
|
| ||||
|
|
|
|