Meade Open battery compartment, Connect AutoStar III handbox to ETX-LS, Remove dust cover

Open battery compartment.

Step

10

Insert batteries according to diagram on battery tray.

Step

11

Connect AutoStar III handbox to ETX-LS.

Step

12

Turn on ETX-LS

LightSwitch.

Step

15

Remove ECLIPS CCD cover.

Step

14

Remove dust cover.

Step

13

ETX-LS begins moving, rotates to find Magnetic North and level, slews to and verifies guide star(s).

Step

16

AutoStar sounds tone	Look through the eyepiece
and display verifies	and focus on the bright star.
successful alignment.	ETX-LS is now
	ready to lead you
	on a tour of the
	night sky!

Step	Step
17	18

The complete ETX-LS Instruction Manual can be found on the AutoStar Suite disk included with your telescope.

©2009 Meade Instruments Corporation. All rights Reserved. Specifications subject to change without notice. Your product may appear visually different. 27 Hubble, Irvine CA 92618. www.meade.com 14-7302-06