Meade instruction manual 15 LX200GPS Specifications, Maksutov Fan

Page 47

SPECIFICATIONS

7" f/15 LX200GPS Specifications

Optical design

Maksutov-Cassegrain

Clear aperture

178mm (7")

Focal length

2670mm

Focal ratio (photographic speed)

f/15

Resolving power

0.64 arc sec

Coatings

Meade EMC Super Multi-Coatings

Mounting

Cast-aluminum, double-tine forks

Gears

5.75"-dia worm gears, both axes

Alignment

Altazimuth or equatorial w/optional wedge

Pointing Precision

2 arc-minutes in GO TO mode

Power

8 C-cell (user-supplied) batteries

 

or optional 12v power supply

Slew Speeds

1x sidereal to 8°/sec in 9 increments

Tripod

Variable-height field tripod

Accessories

8 x 50mm viewfinder

 

1.25" diagonal prism

 

Super Plössl 26mm eyepiece

 

4-speed zero image-shift microfocuser

 

16-channel GPS receiver

 

True-level electronic sensor

Net telescope weight

53 lbs.

Net tripod weight

20 lbs.

Maksutov Fan

The Maksutov optics are equipped with a fan which will assist in the stabilization of the temperature of these optics. The fan operates when a special power cord (sup- plied in the accessory box) is plugged into the12v DC OUT (13E, Fig. 1) and the RS232 port (13G, Fig. 1) of the computer control panel with the power switch in the “ON” position. The amount of time required to stabilize the temperature will be dependent upon ambient conditions including the observation site and preexisting condition of the telescope. The fan should be activated at the beginning of the obser- vation session to accelerate the temperature stabilization. As soon as the optics have reached an equilibrium with the environment the fan should be turned off by unplug- ging the fan power cord. Fan operation time should range between 5 and 25 minutes. While it is permissible to run the fan continuously it is not recommended because the very slight vibration of the fan may cause noticeable movement of the objects observed in the sensitive optics.

47

Image 47
Contents Meade Instruments Corporation Meade Maksutov-Cassegrain Optical System Meade Schmidt-Cassegrain Optical SystemContents QUICK-START Guide Important Note Autostar Telescope FeaturesTelescope? See pages 17 See Optional ACCESSORIES, pages 41, 42,Ascension Declination setting # Computer Control Panel see insetShift Microfocuser? DefinitionsAscension, Library # of Objects Autostar II FeaturesTour the Cosmos with Just the Push of a Button Want to learn more about changing slew speeds? See LX200GPS Tips Getting Started Parts ListingHow to Attach the Tripod to the Telescope Assembly Tip How to Assemble Your TelescopeTo install batteries Choosing an Eyepiece Attach Diagonal or accessoriesToo Much Power? Mounting and Adjusting the ViewfinderTerrestrial Observing Observing Using Autostar IIs Arrow KeysObserving Observing by Moving the Telescope ManuallyKey # Speed Focusing the Eyepiece Using the MicrofocuserSlew Speeds To use the microfocuserMoving Through Autostar II’s Menus Observe the MoonAstronomical Observing To Track an Object AutomaticallyImportant Notes Which One’s the Alignment Star?Go To Saturn Observe a Star using the Automatic Tracking FeatureUsing the Guided Tour Finding True North Global Positioning SystemDetecting True Level To Calculate Sunset time Basic AutostarAutostar II Navigation Exercise Look into the Future Navigating AutostarSelect Item Object MenusWant to learn more about Observing Satellites? See Object MenuTo slew the telescope to catalog objects Event Menu Want to learn more about using the Browse menu? SeeWant to learn more about Landmarks? See Glossary MenuUtilities Menu Timing is Everything Setup MenuRECTION, Adding and editing sites? Setup Menu Daylight SAVING,Mirror, Mirror Hot Button MenusTo Edit a Site Adding Observing SitesTo Add a Site to the user-defined site list To GO to a user-entered object Creating User ObjectsTips Observing SatellitesLandmarks To Add a landmark to the databaseTo check on the available amount of memory in Autostar IdentifyTo Select a landmark from the database To perform a Landmark SurveyDisplayed information Example BrowseEasy Two-Star Alignment How to perform the Easy Align ProcedureAlternate Alt/Az Alignments Initialize AutostarTip Try a Spiral Search One-Star Alt/Az AlignmentTo Set the Home Position Manually Star Charts Periodic Error CorrectionFew tips on photography with the LX200GPS telescopes PhotographyMeade Series 4000 Eyepieces Optional AccessoriesSeries 4000 8 24mm Zoom Eyepiece Illuminated Reticle Eyepiece Collimation MaintenanceDefocused star images. Misaligned 1, 2, Aligned Gauging the Movement of the Telescope Meade Customer ServiceWhat is Smart Drive? Inspecting the OpticsMaksutov Fan Specifications15 LX200GPS Specifications 12 f/10 LX200GPS Specifications 10 LX200GPS Specifications10 f/10 LX200GPS Specifications Autostar II Handbox Specifications 16 f/10 LX200GPS SpecificationsAutostar II System Specifications Celestial Coordinates Setting CirclesEquatorial Alignment Equatorial Wedge Declination Setting CircleLocating Polaris Lining Up with the Celestial PoleLX200GPS mounted on an equatorial wedge Precise Polar AlignmentTwo-Star Polar Alignment Autostar II Polar AlignmentEasy Polar Alignment One-Star Polar AlignmentCity Country Latitude Appendix B Latitude ChartLatitude Chart for Major Cities of the World City State/Prov./Country LatitudeComment Line Command LineWhat you will need Tour ModesTitle Writing a TourPick ONE / Pick END Further Study Appendix D Training the DriveAppendix E the Moon Menu To observe the Apollo 15 landing site using the Moon optionCommercial Shipping 16 LX200GPS Unique FeaturesControl Panel Features To Assemble the 16 Super Field Tripod Telescope AssemblyAttaching the Fork Mounting the Optical Tube Assembly OTAAttaching the Power and Data Cords Attaching the 16 Drive BaseObserving Considerations Tighten the fork arm assem- bly using the provided hex keyTo attach the microfocuser to the de-rotater Appendix GMoon Basic AstronomyAutostar II Glossary Objects in SpaceDeep-Sky Objects PlanetsPage Meade Instruments Corporation
Related manuals
Manual 72 pages 3.96 Kb