Meade ETX-80AT-TC Two-Star Alt/Az Alignment, One-Star Alt/Az Alignment, Observing a Satellite

Page 29
Align to the first star. AutoStar then displays a database of stars for the observer to choose from. Use the Scroll keys to scroll to a star that you wish to align upon. Select a star that you can easily locate in the night sky.

Two-Star Alt/Az Alignment

Two-Star Alignment requires some knowledge of the night sky. AutoStar provides a database of bright stars and two stars from this database are chosen by the observer for alignment.

1.Perform steps 1 through 8 as described in the EASY ALIGNMENT PROCEDURE, page 18.

2 .

3.Press ENTER. The telescope slews to the star for alignment. Use the Arrow keys to move the telescope until the star is visible and centered in the eyepiece.

4.Press ENTER. Repeat procedure for the second alignment star. The telescope is aligned and you are now ready to use AutoStar's GO TO capabilities for a night of observing.

One-Star Alt/Az Alignment

One-Star Alignment requires some knowledge of the night sky. AutoStar provides a database of bright stars. One-Star Alignment is identical to Two-Star Alt/Az: Alignment (see TWO-STAR ALT/AZ ALIGNMENT, above), except only one star from this database is chosen by the observ- er for alignment.

IMPORTANT NOTE: The accuracy of One-Star Alt/Az Alignment, unlike the Two- Star Alt/Az Alignment procedure, depends on how well the observer levels the tel- escope and how close to North the telescope is pointed when setting the Home Position (Fig. 24). Because Two-Star Alignment uses two stars to align upon, it is more precise than One-Star Alignment.

Observing a Satellite

NOTE: Satellite observing is an exciting challenge. Most satellites are in low orbit, traveling at approximately 17,500 mph. They move quickly across the sky and are visible only for a few minutes, requiring AutoStar to slew the telescope rapidly. Best viewing is near Sunrise or Sunset when the sky is still dark. Viewing in the middle of the night can be problematic because the satellite may pass overhead, but not be visible as it is in the Earth's shadow.

1.Choose a satellite from the Select menu, then press ENTER. AutoStar scans its database to find if that satellite is expected to pass overhead within the next 6 hours.

2.If a satellite is expected, use the Scroll keys to access a list of information about the pass, including acquisition time, location, etc.

3.At the end of the list is “Alarm.” Press ENTER and AutoStar automatically sets the alarm to sound several minutes before the scheduled appearance. You may return to regular observations until the alarm goes off.

4.When the alarm goes off, return to the Satellite menu and press a Scroll key until the desired satellite is on the top line of the display.

5.Press GO TO. AutoStar slews the telescope to where the satellite should appear. The motor drive stops and a countdown starts.

NOTE: If the scheduled appearance position of the satellite is obstructed (i.e., by a building, tree, or hill), press ENTER and AutoStar starts to move the telescope along the expected satellite track. When the track clears the obstruction, press ENTER again to pause the telescope, then continue with this procedure.

6.With about 20 seconds left on the countdown timer, start watching through the eyepiece for the satellite to enter the field of view.

7.When the satellite enters the field of view, press ENTER. The telescope starts to track with the satellite.

29

Image 29
Contents MEADE.COM ETX-80AT-TCPage Contents QUICK-START Guide Setting up the TripodObserve ETX-80AT Telescope Telescope Features@ 2# Flip mirror control in the up position ETX Your Personal Window to the UniverseTripod Computer Control PanelTour the Cosmos with Just the Push of a Button Autostar FeaturesPage Join an Astronomy Club Attend a Star Party Telescope Assembly Setting up the Tripod Parts ListingGetting Started Connect the AutoStar HandboxManual Operation of the Telescope without AutoStar Choosing an EyepieceSlew Speeds Manual Operation of the Telescope Using AutoStars Arrow KeysTo Track an Object Automatically Observe the MoonMoving Through AutoStar’s Menus Initializing AutoStarToo Much Power? Go To Saturn Easy AlignmentWhich One’s the Alignment Star? Using the Guided TourIngvSa e Daylight pesco Tel Autostar MenusAutoStar Navigation Exercise Autostar OperationNavigating Autostar Adjusting the Speed of a Scrolling MessageEntering Numbers and Text into Autostar Object Menu Utilities Menu Event MenuGlossary Menu Enter Setup MenuReverse UP/DOWN Reverses Reverse L/R ReversesMenu Daylight SAVING, Advanced Features Observing a Satellite Two-Star Alt/Az AlignmentOne-Star Alt/Az Alignment Photography with Meade’s AutoStar Suite Digital Photography with the ETXLunar Planetary Imager Meade Series 4000 Super Plossl Eyepieces Optional AccessoriesGeneral Maintenance Maintenance and ServicingStorage and Transport Inspecting the OpticsCannot seem to focus No image appears in the eyepiece TroubleshootingETX-80AT Specifications Meade Customer ServiceAutoStar Specifications AutoStar DimensionsTo GO to a user-entered object Appendix a Using Autostar to Enter R.A. and DEC CoordinatesCelestial Coordinates Appendix B Equatorial Polar AlignmentPolar Alignment Easy Polar Alignment Autostar Polar AlignmentOne-Star Polar Alignment Two-Star Polar AlignmentLatitude Chart for Major Cities of the World Appendix C Helpful ChartsCity State Latitude City Country LatitudeFurther Study Appendix D Training the DriveAutoStar Glossary Appendix E Basic AstronomyObjects in Space MoonDeep-Sky Objects PlanetsPage Meade Limited Warranty

ETX-80AT-TC specifications

The Meade ETX-80AT-TC is a sophisticated yet user-friendly telescope that caters to both novice astronomers and seasoned stargazers. This compact telescope is particularly praised for its portability, making it an ideal choice for those who wish to explore the night sky without the burden of heavy equipment.

One of the standout features of the ETX-80AT-TC is its 80mm aperture, which delivers impressive light-gathering capabilities. This allows users to observe a wide range of celestial objects, from the craters on the Moon to distant galaxies. The telescope’s Achromatic refractor design minimizes chromatic aberration, ensuring sharp and clear images across the field of view.

The Meade ETX-80AT-TC is equipped with the AutoStar computer control system, which enhances the observational experience significantly. This technology allows users to locate and track thousands of celestial objects with ease. With a simple push of a button, the telescope can automatically find and track planets, stars, and deep-sky objects, making it perfect for those who are new to astronomy and may find manual navigation challenging.

Additionally, the telescope features a built-in Solar System tour that animates a journey through the solar system, providing educational insights about the celestial bodies in our neighborhood. It is operated via a user-friendly handheld controller with a numeric keypad and an LCD display, making navigation intuitive even for beginners.

The ETX-80AT-TC also includes a durable and lightweight design, with an integrated tabletop tripod for stable viewing. It can be easily set up and taken down, allowing for spontaneous stargazing adventures. The telescope is compatible with various Meade accessories, including additional eyepieces and filters, which further enhance the observing experience.

In terms of mechanics, the ETX-80AT-TC boasts smooth, slow-motion manual controls for fine adjustments and a flip mirror for easy switching between visual and photographic modes. Whether capturing breathtaking astrophotos or enjoying the stars visually, this telescope delivers versatility and quality.

Overall, the Meade ETX-80AT-TC stands out with its thoughtful combination of features, technology, and portability, making it an excellent choice for anyone looking to explore the wonders of the night sky. Whether you are a budding astronomer or a more experienced enthusiast, this telescope provides ample opportunities for wonder and discovery under the stars.