Orion XT10, XT6, XT8 instruction manual One-Year Limited Warranty

Page 20

One-Year Limited Warranty

This Orion SkyQuest IntelliScope Dobsonian Reflecting Telescope is warranted against defects in materials or workmanship for a period of one year from the date of purchase. This warranty is for the benefit of the original retail purchaser only. During this warranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defective, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is not registered, proof of purchase (such as a copy of the original invoice) is required.

This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For further warranty service information, contact: Customer Service Department, Orion Telescopes & Binoculars, P. O. Box 1815, Santa Cruz, CA 95061; (800) 676-1343.

Orion Telescopes & Binoculars

Post Office Box 1815, Santa Cruz, CA 95061

Customer Support Help Line (800) 676-1343 • Day or Evening

20

Image 20
Contents XT6, XT8, XT10 #9985, #9986, #9987SkyQuest XT8 IntelliScope Unpacking Table of ContentsParts List Assembly Assembly of the Dobsonian BaseInstalling the Vertical Stop Correct Tension padsPlacing the Optical Tube on the Dobsonian Base Installing the Eyepiece RackInstalling the CorrecTension Friction Optimization System Installing the Finder Scope Does not require this bushingAltitude and Azimuth Motion Using Your TelescopeInserting an Eyepiece Setting the Altitude Tension Level Focusing the TelescopeViewing with Eyeglasses Aligning the Finder ScopeFocusing the Finder Scope Aiming/Pointing the TelescopeMagnification 1200 mm = 25 mmCarrying the Telescope Use of 2-Inch Eyepieces XT8 and XT10 onlyTube Balance Preparing the Telescope for Collimation Alignment Collimation of the Optical SystemCollimation Cap and Mirror Center Mark Adjusting the Primary Mirror Aligning the Secondary MirrorStar-Testing the Telescope Astronomical ObservingSelecting an Observing Site Seeing and TransparencyLet Your Eyes Dark-Adapt Eyepiece SelectionMoon SunPlanets StarsCare and Maintenance Optional IntelliScope Computerized Object LocationCleaning Eyepiece Lenses Cleaning MirrorsSpecifications SkyQuest XT6 IntelliScopeSkyQuest XT8 IntelliScope SkyQuest XT10 IntelliScopeOne-Year Limited Warranty
Related manuals
Manual 20 pages 35.54 Kb