Boston Acoustics GT-20 GT-222 manual Control Functions

Page 4

Control Functions

3

1

6

4

2

5

7

GT-22 Top Panel Shown

8

GT-22 Front Panel Shown

1 RCA Inputs

1

RCA cables from head unit or from other line level device should be connected

 

here. Use both inputs (L & R) for stereo; use “L” input for mono.

2

2 Remote Input

Use the supplied FEMALE quick-connector to connect the REMOTE trigger lead from the head unit to the amplifier. Amplifier turns “ON” when head unit is turned “ON.” One FEMALE .210" connector is supplied with amplifier.

3 Input Switch

In the left position, the L & R inputs go to the L & R channels of the amplifier. In the right position, the input is for mono operation.

4 Input Sensitivity Control

Turn control clockwise to increase the amplifier sensitivity to incoming signals. Turn

control counterclockwise to decrease the amplifier sensitivity.

5 Highpass Crossover Controls

To use 12dB/octave crossover, move switch to right-hand position. Highpass crossover frequency is adjustable from 20Hz to 350Hz by rotary control. (Moving switch to left-hand position will bypass crossover functions.)

4

Image 4
Contents Channel, High-Current/High-Power Amplifiers GT-20 GT-22Table of Contents Parts List Features and SpecificationsControl Functions Lowpass Crossover Controls Status LED IndicatorsControl Mechanical Functions Amplifier Linking Wire ConnectionFuses General Installation Precautions Before You InstallBattery & Charging System Wire RoutingInstallation-Amplifier Mounting Choose the Mounting LocationInstallation-Fuses & Wiring Wire GaugePassenger & Trunk Compartment Mounting Amplifier FusesRemote Input Connection Power/B+ & Power/GND ConnectionSpeaker Output Connection Setup Tuning-Full-range Speakers Mono Subwoofer OperationMusic Highpass & Lowpass Crossover ControlsHead Unit VolumeCrossover Controls Setup Tuning-Rear Fill Speakers Setup Tuning-SubwoofersPhase Lowpass Crossover ControlSystem A-Full-range Front Speakers System ExamplesSystem B-Rear Fill Speakers System C-Single Subwoofer 2Ω System D -Parallel 4Ω Subwoofers 2Ω loadStatus LEDs on Amplifier not Lit-Head Unit Source Turned on Amplifier Troubleshooting GuideEngine Noise from Speakers Limited Warranty US Contact and Warranty InformationIf Service Seems Necessary