Objective lens
Optical tube
Telescope securing knob
Altazimuth tabletop base
Finder scope base
EZ Finder II
Reflex Sight
10mm eyepiece
90° star diagonal
20mm eyepiece
Photo tripod adapter
Figure 1c: The GoScope 80 TableTop Telescope
Dovetail Holder: Secures the telescope into the
90° Star Diagonal: An adapter used on refractor and cata- dioptric telescopes that positions the eyepiece to a more com- fortable viewing angle and provides a right side up image.
GoScope 80 TableTop:
Objective Lens: The glass lens or lens system at the front end of the optical tube. This is the
Focus Knob: This knob makes an internal adjustment to the optics to adjust the sharpness of the image.
Dovetail Holder: Secures the telescope into the
90° Star Diagonal: An adapter used on refractor and cata- dioptric telescopes that positions the eyepiece to a more com- fortable viewing angle and provides a right side up image.
Assembly
Assembly of the TableTop is very easy. Carefully remove the protective packaging. Your TableTop arrives from the factory with the optical tube attached to the base – just install the visual accessories and you will be ready to start viewing with your new telescope! These accessories will be found in a box within the main box. Please save all original packaging. This will help protect your TableTop if you wish to transport it or in the unlikely event repair service is necessary.
Parts List
1EZ Finder II reflex sight with bracket
125mm eyepiece (90mm model)
120mm eyepiece (80mm & 100mm models)
110mm eyepiece
1Diagonal (Refractor and
4