Radio
AM/FM Tuning
Note: The type of reception bands, the frequency step, and the upper and lower limits of the receiving frequency are dependent on the specifications of the different areas.
1 Press the TUNER button on the control panel to enable the tuner.
2 Once in tuner mode, press the TUNER button again to select the desired band (FM/AM).
Broadcasting station in AM
AM
KHz
3 To change stations, push the FORWARD SKIP button to scan up, or the BACKWARD SKIP button to scan down. This radio is also equipped with an auto search function, which will automatically tune in to available stations. To use this function, simply press and hold the FORWARD SKIP or BACKWARD SKIP button (about 1 second) until the display starts searching for stations. Now the radio will stop on the next station that it can tune in.
Note: If the FORWARD or BACKWARD skip buttons are pushed during autosearch, the searching will stop at that point.
4 To manually search for a station, push the FORWARD or BACKWARD skip button one press at a time until the desired station is found.
5 In FM mode, there will be a “stereo” displayed on the LCD when a station broadcasting in stereo is received.
Stereo reception
STEREO
FM
MHz
Presetting Stations
1 You can store up to 20 FM stations and 12 AM stations into the preset memory.
2 To program a preset, begin by tuning the radio to a desired station by using either auto or manual search.
Search a desired station
AM
KHz
3 Once a desired channel is located, press the MEMORY button one time. You will see
Choose track 4
TRACK
MEMORY
4 Press the REPEAT button to select the desired preset number. The preset number will increase by one each time it is pressed. Example: The first time the REPEAT button is pressed, you will see a “1”. Press the button twice and a “2” will display. The number you select will be the number of the preset for the selected station.
Choose Channel 1
CH
AM
KHz
5 Press MEMORY one last time and the selected station is stored.
Channel 1 presetting finish
CH
AM
KHz
6 Repeat steps 2 - 5 until all desired stations have been programmed.
7 Once all of the desired stations have been programmed, press the REPEAT button to select presets.
8 Do not turn off the power. This will erase all the presets.
8