Appendix:
Check Appendix D for a brief introduction of celestial coordinate systems
www.iOptron.com
Chapter.1 Set Up And Alignment
1.0Basic Symbols
R | Right ascension |
D | Declination |
A | Altitude |
Z | Azimuth |
Cele | Sidereal speed |
Sola | Solar speed |
Moon | Lunar speed |
Land | Land mode |
nnX | Slewing speed |
1.1Set Up
By default, the mount works in
TR.A. | 1h36m 2s |
|
TDEC | 90°0’ 0” |
|
R.A. | 19h52m 5s |
|
DEC | 47°31’16” | 64X |
Lgst | 7h52m38s | Stop |
Alt. | 0°0’ 0” |
|
Azi. | 0°0’ 0” |
|
N |
When the power is turned on you will see “G_ON” (GPS turned on) in the upper right corner of the screen. In about a minute, after the internal GPS communicate with the satellites, you will see “G_OK” on the screen. Both time and location are automatically set. Setup is finished in
If there is no GPS connected refer to 0.2 Getting Started on how to manually set up time and location.
The mount can also work in equatorial mode. Tilt the mount to the appropriate angle and point it to the polar star. Go to “Set up GotoNova”, select “Set Mount Type”, and select Equatorial mode.
1.2Align
1.2.1
From the main menu, select “Align”. The system provides for
Select
10