Quick Start, Loudspeaker placement | Cerwin-Vega P1800SX, P1500x

CERWIN-VEGA! PROFESSIONAL

Quick Start

The steps below provide a quick reference on how to setup and use a single loudspeaker. A typical setup will follow the same basic steps.

STEP 1

Make sure the loudspeaker is unplugged.

Be sure the master switch is to set to the ‘OFF’ position.

Turn the Volume to the lowest level (fully counter-clockwise)

Check that the loudspeaker voltage selector is set to the same voltage as the AC power outlet.

STEP 2

Place the loudspeaker in the ideal location. See the Loudspeaker Placement page for recommended usage.

Connect the source audio equipment output to the loudspeaker input. Be sure the source equipment is powered on and set to a normal output level.

STEP 3

Connect the power cord to the loudspeaker and AC power outlet.

Set the master power switch to the ‘ON’ position and verify the rear POWER LED indicator is illuminated.

Slowly turn the volume clockwise until the sound output is at the desired level. If there is no sound, check to make sure the source equipment is providing audio output.

NOTE(s)

When you are done using the loudspeaker, set the master power switch to ‘OFF’ before removing any cables and turning off the source audio equipment.

Do not switch the loudspeaker voltage selector or MIC/LINE switch while the loudspeaker is powered ‘ON’ and plugged into an AC power outlet.

Loudspeaker placement

∙Never point a microphone directly at a loudspeaker as this will result in extreme feedback (unwanted sound). Be sure the loudspeaker is placed away from the front of the microphone or directly behind the microphone when in a floor monitor position.

∙When used with turntables, carefully place the loudspeaker so that any vibrations do not interfere with the turntable performance and functionality.

∙Avoid placing the loudspeaker in the corners or along the walls of a room. This will increase the low-frequency sounds and the sound will result in a muddy and incoherent sound reproduction.

∙Avoid placing the speakers directly on a hollow stage. It is better to place the loudspeakers on tripod stands or a sturdy table.

∙The loudspeaker should be placed two to four feet above the ear level of the audience since the human body can absorb sound especially at high frequencies. This will make sure the entire audience can hear the sound system with the best possible clarity.

P1500x, P1800SX specifications

Cerwin-Vega is renowned for its commitment to delivering powerful and reliable sound systems, catering to both professional and home audio environments. Among its impressive lineup, the P1800SX and P1500X speakers stand out due to their exceptional features, advanced technologies, and robust performance capabilities.

The Cerwin-Vega P1800SX is a high-performance powered subwoofer, designed to produce deep, thunderous bass that enhances any audio experience. With an 18-inch driver and a powerful 1000-watt amplifier, the P1800SX is engineered to handle high output levels without sacrificing sound clarity. This subwoofer employs Cerwin-Vega's proprietary technology to deliver low-frequency extension, ensuring that every beat and note resonates with impact. Its rugged construction and efficient cooling system make it suitable for both indoor and outdoor use, ensuring reliability during gigs, events, or home listening sessions.

The P1800SX also features a built-in DSP (Digital Signal Processing) with preset modes tailored for various applications such as live sound, music playback, or recording, allowing users to optimize performance instantly. This flexibility makes it an invaluable addition to any sound system, capable of adapting to diverse environments and audiences. Moreover, the enclosure is designed to minimize vibration, enhancing sound quality while ensuring durability.

On the other hand, the Cerwin-Vega P1500X is a versatile powered PA speaker that showcases an impressive combination of portability and performance. Featuring a robust 15-inch woofer powered by a 1500-watt amplifier, it is designed to deliver clear, powerful sound across various settings. The P1500X's integrated components ensure a seamless setup, making it perfect for musicians, DJs, and public speakers who require reliable sound reinforcement.

One of the standout features of the P1500X is its user-friendly connectivity options, including XLR, TRS, and RCA inputs, allowing it to integrate effortlessly with different audio sources. The speaker also includes a built-in mixer, providing users with basic control over volume and EQ settings, enhancing its usability in various scenarios. The lightweight design, coupled with convenient handles, ensures that transporting the P1500X is hassle-free, making it ideal for on-the-go professionals.

In summary, both the Cerwin-Vega P1800SX and P1500X reflect the brand's dedication to delivering exceptional audio quality. With their powerful amplifiers, advanced technologies, and robust designs, these speakers provide a rich listening experience for a wide range of applications, ensuring that Cerwin-Vega remains a leader in high-performance audio solutions.