Celestron NexStar HC manual Hand Control, EyepieceStarPointer Diagonal

Page 9

The Hand Control

The hand control is located on the side of the fork arm and can be removed and used remotely or used while attached to the fork. The hand control attaches to the fork arm by resting on two posts, located on the bottom of the hand control cradle, and a clip inside the fork arm. To remove the hand control from the fork arm cradle, gently lift the hand control upwards and pull out. To return the hand control into the fork arm, lower the hand control into the cradle so that the two holes in the bottom of the hand control go over the posts on the bottom of the cradle, and the opening in the back of the hand control slides over the clip inside the fork arm.

Once the telescope is powered up, the hand control can be used to move the optical tube in altitude (up and down) and azimuth (side to side).

•

•

Press UNDO (for GT model only). This will bypass the normal alignment procedures and will still allow you to control the telescope.

Use the Up arrow directional button to move the telescope tube until it is roughly parallel to the ground. This will make it more convenient to attach the necessary accessories as well as remove the front lens cover and install batteries when they are needed.

You are now ready to attach the included visual accessories onto the telescope optical tube.

The Eyepiece

The eyepiece, or ocular, is the optical element that magnifies the image focused by the telescope. The NexStar 4 has an internal diagonal mirror that diverts light to the eyepiece barrel on top of the telescope's rear cell. The eyepiece fits into the barrel built-in to the rear cell. To install the eyepiece:

1.Loosen the thumbscrew on the eyepiece barrel so it does not obstruct the inner diameter of the barrel.

2.Slide the chrome portion of the eyepiece into the eyepiece barrel.

3.Tighten the thumbscrew to hold the eyepiece in place.

To remove the eyepiece, loosen the thumbscrew on the star diagonal and slide the eyepiece out.

Eyepieces are commonly referred to by focal length and barrel diameter. The focal length of each eyepiece is printed on the eyepiece barrel. The longer the focal length (i.e., the larger the number) the lower the eyepiece power or magnification; and the shorter the focal length (i.e., the smaller the number) the higher the magnification. Generally, you will use low-to-moderate power when viewing. For more information on how to determine power, see the section on “Calculating Magnification.”

EyepieceStarPointer

Diagonal

Barrel

Flip Mirror Control

Focuser Knob

Figure 3-2 – The Rear Cell with Visual Accessories

Barrel diameter is the diameter of the barrel that slides into the telescope's eyepiece barrel. The NexStar uses eyepieces with a standard 1-1/4" barrel diameter.

Note:

As mentioned, the NexStar has an internal flip mirror that can divert light either through the eyepiece barrel at the top of the rear cell or directly through the photographic opening at the back of the rear cell. Make sure that the flip mirror is in the "up" position for viewing with an eyepiece and in the "down" position for taking photographs (see Astronomy Basics section of the manual).

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Celestial Coordinate System Telescope Maintenance Some of the many standard features of the NexStar include Flip Mirror Focuser Knob Direction Buttons Page Assembling the NexStar Powering the NexStarEyepiece Hand ControlEyepieceStarPointer Diagonal Flip Mirror Control Focuser KnobStar Pointer Finderscope with Mounting Bracket Star Pointer FinderscopePage Hand Control Rate Button Utility FeaturesGuideStar Software NexStar Hand Control Hand Control Operation Alignment ProcedureEnter Selecting an Object Object CatalogSlewing to an Object More InformationTour Mode Direction ButtonsObserving Tip Setup Procedures User Objects Helpful Utility FeaturesNexStar Ready Image Orientation Focusing Calculating MagnificationDetermining Field of View General Observing Hints Celestial sphere seen from the outside showing R.A. and DEC Celestial Coordinate SystemMotion of the Stars Definition Polar Alignment with optional WedgeAttaching a Camera to the NexStar Photography with the NexStarFinding the North Celestial Pole Observing the Planets Observing the MoonObserving Deep Sky Objects Observing the SunSeeing Conditions TransparencySeeing Care and Cleaning of the Optics Super Modified Achromatic SMA Eyepieces 11/4 Page Page Appendix a Technical Specifications Appendix B Glossary of Terms Page Page Appendix C Maps of Time Zones Page Page Page Page Page Page Page Celestron ONE Year Warranty Page Addendum to Nexstar Telescope Manual

NexStar HC specifications

The Celestron NexStar Hand Controller (HC) is an advanced control unit designed to enhance the astronomical observation experience for both novice and experienced stargazers. This innovative device is an integral part of the NexStar telescope series and offers a range of features that simplify the process of locating celestial objects.

One of the main features of the NexStar HC is its user-friendly interface. The controller is equipped with a large, illuminated LCD screen that displays essential information clearly, even in low-light conditions. The layout is intuitive, allowing users to quickly familiarize themselves with its functions. The keypad includes dedicated buttons for common tasks, making it easy to navigate the expansive database of celestial objects.

The NexStar HC boasts an impressive database containing over 40,000 celestial objects, making it a powerful tool for astrophotography and observational astronomy. Users can access planets, stars, galaxies, and nebulae at the touch of a button. The built-in database allows for precise and efficient locating of objects, significantly reducing the time spent searching the night sky.

One of the standout technologies featured in the NexStar Hand Controller is the GoTo functionality. This advanced tracking technology enables the telescope to automatically locate and track celestial objects with high precision. By entering the desired object into the controller, users can allow the telescope to autonomously adjust its position, providing a hassle-free experience.

Additionally, the NexStar HC supports various alignment methods, including SkyAlign, AutoAlign, and One-Star Align. These alignment techniques assist in calibrating the telescope for optimal tracking and positioning. The SkyAlign method, in particular, allows users to point the telescope at any three bright stars, and the HC will calculate the telescope's location in relation to those stars, making alignment accessible even for beginners.

The NexStar Hand Controller is also compatible with Celestron’s StarSense technology, enabling automatic alignment using a smartphone. This feature allows users to refine their observations seamlessly and provides a modern twist to traditional stargazing methods.

Other notable characteristics include programmable go-to tracking speeds and the ability to save user-defined locations. The controller’s ergonomic design ensures comfort during long observing sessions, while the robust build quality guarantees durability.

In summary, the Celestron NexStar Hand Controller combines a wealth of features and cutting-edge technologies to enhance the stargazing experience. Its user-friendly interface, extensive database, versatile alignment methods, and compatibility with advanced tracking systems make it an indispensable tool for anyone looking to explore the wonders of the night sky.
Top Page Image Contents