Celestron C6-RGT manual Focusing, Aligning the Finderscope, Calculating Magnification

Page 30

Focusing

To focus your telescope, simply turn the focus knob located directly below the focuser. Turning the knob clockwise allows you to focus on an object that is farther than the one you are currently observing. Turning the knob counterclockwise from you allows you to focus on an object closer than the one you are currently observing.

•If you wear corrective lenses (specifically glasses), you may want to remove them when observing with an eyepiece attached to the telescope. However, when using a camera you should always wear corrective lenses to ensure the sharpest possible focus. If you have astigmatism, corrective lenses must be worn at all times.

Aligning the Finderscope

Accurate alignment of the finder makes it easy to find objects with the telescope, especially celestial objects. To make aligning the finder as easy as possible, this procedure should be done in the daytime when it is easy to find and identify objects. The finderscope has a spring-loaded adjustment screw that puts pressure on the finderscope while the remaining screws are used to adjust the finder horizontally and vertically. To align the finder:

1Choose a target that is in excess of one mile away. This eliminates any possible parallax effect between the telescope and finder.

2Release the R.A. and DEC clamps and point the telescope at your target.

3Center your target in the main optics of the telescope. You may have to move the telescope slightly to center it.

4Adjust the screw on the finder bracket that is on the right (when looking through the finder) until the crosshairs are centered horizontally on the target seen through the telescope.

5Adjust the screw on the top of the finder bracket until the crosshairs are centered vertically on the target seen through the telescope.

Image orientation through the finder is inverted (i.e., upside down and backwards left-to-right). This is normal for any finder that is used straight-through. Because of this, it may take a few minutes to familiarize yourself with the directional change each screw makes on the finder.

Calculating Magnification

You can change the power of your telescope just by changing the eyepiece (ocular). To determine the magnification of your telescope, simply divide the focal length of the telescope by the focal length of the eyepiece used. In equation format, the formula looks like this:

Focal Length of Telescope (mm)

Magnification = 

Focal Length of Eyepiece (mm)

Let’s say, for example, you are using the 20mm eyepiece. To determine the magnification you simply divide the focal length of your telescope (the C6-R for example has a focal length of 1200mm) by the focal length of the eyepiece, 20mm. Dividing 1200 by 20 yields a magnification of 60 power.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Advanced Series Advanced Series GT Assembly Version Get Alt-Az Goto Alt-Az Hibernate Turn On/Off GPS Page Advanced Series C6-R C8-N ShownAdvanced Series C6-RGT Setting up the Tripod Attaching the Equatorial MountInstalling the Counterweight Bar Attaching the Center Leg BraceInstalling the Counterweight Attaching the Hand Control Holder Advanced GT Models OnlyAttaching the Telescope Tube to the Mount Installing the Finderscope Balancing the Tube in R.A Telescope Tube CompletelyAdjusting the Mount Adjusting the Mount in AltitudeAdjusting the Mount in Azimuth Powering the TelescopeAttaching the Declination Cable For GT Models Only Advanced GT Hand Control Hand Control Operation Double StarsAlignment Procedures Startup ProcedureAuto Align Auto Three-Star AlignQuick-Align Last AlignmentRe-Alignment Slewing to an Object Object CatalogSelecting an Object Finding PlanetsDirection Buttons Tour ModeConstellation Tour Rate ButtonSetup Procedures Identify Scope Setup Features Precise GoToObserving Tip Helpful Hint Utility Features Helpful Hint Advanced GT Image Orientation Focusing Aligning the FinderscopeCalculating Magnification Determining Field of View General Observing HintsCelestial Coordinate System Motion of the Stars Pointing at Polaris Finding the North Celestial Pole Declination Drift Method of Polar Alignment Observing the Planets Observing the MoonLunar Observing Hints Observing the SunSeeing Conditions Solar Observing HintsObserving Deep Sky Objects TransparencyUsing the Lens Cap Aperture Stop Piggyback Short Exposure Prime Focus Photography Terrestrial Photography MeteringReducing Vibration Auto Guiding Care and Cleaning of the Optics CollimationCollimated telescope Should appear as a Page Page Page Appendix a Technical Specifications Appendix B Glossary of Terms Page Eclipsing or obscuring the brightness of the star Appendix C Longitudes Latitudes Georgia Minnesota Rhode Island Canada Appendix D RS-232 Connection Additional RS232 Commands Appendix E Maps of Time Zones Page Page Page Page Page Page Page Celestron TWO Year Warranty
Related manuals
Manual 69 pages 47.02 Kb

Advanced Series GT, C6-R, C6-RGT specifications

The Celestron C6-RGT and C6-R models, part of the Advanced Series GT lineup, are popular choices for amateur astronomers seeking high-quality optics and reliable features. The C6-RGT, equipped with a 6-inch refractor, is designed for both visual and astrophotographic pursuits. Its impressive features make it a great option for anyone looking to explore the night sky in greater detail.

One of the standout characteristics of the C6-RGT is its large 6-inch aperture, which allows for exceptional light-gathering capability. This feature is crucial for viewing faint celestial objects, giving users the ability to observe details in nebulae, galaxies, and star clusters. The refractor design minimizes chromatic aberration, ensuring sharp and clear images across a wide range of viewing conditions.

The telescope comes with a fully multi-coated optics system that enhances light transmission and contrast, creating brighter and clearer images. The C6-R is also designed with a robust aluminum tube that not only ensures durability but also helps maintain stability during long observing sessions.

The Advanced Series GT mount is another essential element of the C6-RGT and C6-R models. This computerized mount features a sturdy, stable design that supports a wide range of telescopes while providing smooth tracking of celestial objects. The GoTo technology allows users to locate and track over 40,000 celestial objects with ease. This high level of automation is particularly helpful for beginners who may be unfamiliar with the night sky.

Another notable feature of the Advanced Series GT is its ability to be controlled through a smartphone or tablet, thanks to Celestron's SkyPortal app. This integration opens doors for enhanced stargazing experiences, offering customizable tours and educational information right at your fingertips.

In terms of usability, both models have a comfortable height and the mount can be easily adjusted to accommodate various observing positions. The telescope is also portable, making it convenient for outreach events or trips to dark-sky locations.

Overall, the Celestron C6-RGT and C6-R models, with their combination of powerful optics, advanced technology, and user-friendly features, represent an excellent choice for both budding astronomers and passionate enthusiasts. With Celestron’s commitment to quality and innovation, these telescopes promise to deliver unforgettable views of the wonders of the universe.
Top Page Image Contents