Preparation for Operation

Before getting started make sure to follow these steps:

•Take the scope out of the case.

•Insert the batteries into their housing with the polarity order shown on the main body of the unit.

•Switch on the Aries scope by the master power switch, make sure the protective lens cover is still attached to the lens.

•The unit will turn on automatically when you bring it to your eye and the proximity emitter will send a beam out to sense the distance to your forehead.

•We expect your right eye to aim through the scope. Keep both of your eyes open so you are able to see the color-coded LEDs with your left eye.

•In order to assure the proper functioning of the proximity sensor make certain that the protective glass surface of the sensor is always clean.

•When the scope is first powered up, the initial settings are:

•Light intensifier tube Brightness - 100%;

•Reticle brightness - 50%;

•Illuminator brightness - 100%.

•Observe the scene, and adjust the diopter for optimal image clarity (as described in focusing p 6).

•You may now enter the dark environment or simply shut the lights off in order to darken the room.

•Remove the lens cap/daylight filter.

•Observe the scene and adjust the front lens for ideal focus.

•Adjust the digital features as needed.

•The unit will turn off automatically if you move it away from your face.

•To increase battery life the LED diodes go off after 10 seconds.

•You will need to focus for different distances.

•Take your time learning about your SMART scope. It will take practice to properly use this device. As you use this scope you will be able to improve your speed of focusing, as well as sharpness of image.

•Have fun and enjoy.