General

Take time to follow the instructions and do things right the ﬁrst time. Read all instructions prior to starting. Before you start, check to see that you have the correct number of parts. Use your parts list which is broken down by carton.

The manufacturer reserves the right to revise, change or modify construction of their product.

CONTRACT INSTALLATIONS

The manufacturer is in no way afﬁliated with any professional installer. Therefore the manufac- turer can assume no responsibility, for errors in installation by the home owner or said profes- sional installer. If you have your deck installed by others, please supervise to be sure they comply with the proper installation techniques shown.

Their past experience or short cuts may not cover the latest improvements in our decks. Do not allow any short cuts of any nature.

LOCAL CODES

Local building code may require obtaining a building permit and may have regulations on set backs, barriers, devices and other conditions that must be followed. Any after market or home built deck should be built to the local building code requirements, including load capacity and fencing requirements.

Local electrical code may require obtaining a building permit and may have regulations on setbacks, devices and other conditions that must be followed.

All electrical outlet connections should be a minimum of 5 feet from the outside perimeter of the wall of the pool. From 5-10 feet there should be either a ﬁxed connection (outlet box) or twist- lock connection with a GFCI. Connect power cords to a 3-wire grounding-type outlet only.

Severe electrical shock could result if you in- stall your pump or ﬁlter on a deck. They could fall into the water, causing severe shock or electrocu- tion. Do not install on a deck or other surface at, above or slightly below the top SEAT of the pool.

BARRIER REQUIREMENTS

If the distance from the top of the assembled pool is less than 48” vertically from the surround- ing grade, a fence or barrier is needed to surround

the pool with a minimum height of 48”.

A barrier is necessary to provide protection against potential drowning and near drowning and is not a substitute for constant supervision of children.

A barrier is a fence, wall, or a combination thereof which completely surrounds the swim- ming pool and obstructs access to the swimming pool. Barriers must comply with local and national building codes and the US Consumer Product Safety Commission.

These are minimum fencing and barrier re- quirements. Check your local building codes for other requirements they may request. Optional fencing kits are available, Please contact your lo- cal dealer.

If pool covers are used for safety barriers they should comply with ASTM F 1346 “Stan- dard Performance Speciﬁcation for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs.”

GETTING STARTED

Unpack and identify all the parts to your deck using the enclosed packing list.

TO ASSEMBLE THE DECK YOU WILL NEED:

1.DRILL WITH A 7/64", 5/32", 3/16" AND 5/16" BIT

2.7/16" WRENCH

3.#3 POINT PHILLIPS SCREW DRIVER

4.MEASURING TAPE AND MARKING PENCIL

ATTENTION

DECKS ARE MADE FOR 52 INCH DEEP POOLS

IF YOUR POOL IS 48" DEEP

YOU WILL HAVE TO DIG A TRENCH

OR CUT THE BOTTOM OF THE POSTS

(4 INCHES) IN ORDER TO LEVEL THE HEIGHT OF THE DECK WITH THE HEIGHT OF YOUR POOL.

THE BASE OF THE DECK MUST BE LEVEL WITH THE TOP LEDGE OF YOUR POOL

side deck specifications

Swim'n Play's side deck is a revolutionary addition to the world of outdoor recreational facilities, designed to enhance the swimming experience for families and enthusiasts alike. This innovative side deck is crafted with both functionality and aesthetics in mind, making it a perfect complement to any pool setup.

One of the standout features of the Swim'n Play side deck is its robust construction. Made from high-quality materials, the deck provides durability and resistance to the elements, ensuring it remains in excellent condition over time. The non-slip surface guarantees safety, allowing users to move freely without the risk of slipping, even when wet. This is particularly important for families with children or for facilities that cater to group activities.

In terms of design, the Swim'n Play side deck boasts a sleek and modern appearance. Available in various colors and finishes, it can seamlessly integrate with the existing aesthetic of any pool area. The modular design allows for easy installation and customization, meaning it can adapt to different pool shapes and sizes while providing ample space for lounging, swimming, or play.

Another key characteristic of the Swim'n Play side deck is its emphasis on user comfort. The deck features ergonomically designed seating areas that provide relaxation for adults while offering safe, shallow areas for children to play. This dual functionality makes it an ideal spot for parents to supervise their kids while enjoying the sun.

Technological advancements in the Swim'n Play side deck include integrated drainage systems that help manage water runoff efficiently, preventing pooling on the surface. This not only enhances safety but also contributes to maintaining a clean and dry environment around the pool area. Additionally, the UV-resistant coating ensures that colors will not fade, preserving the aesthetic appeal year-round.

Maintenance is straightforward with the Swim'n Play side deck. Its materials are easy to clean, requiring only occasional surface washing to keep it in pristine condition. The thoughtful design means that there are no hard-to-reach crevices, making upkeep a breeze.

In summary, the Swim'n Play side deck is an exceptional blend of safety, comfort, and modern design, making it an essential feature for any pool environment. Its durable construction, user-friendly characteristics, and innovative technologies ensure that it meets the needs of today’s recreational spaces, promoting enjoyable and safe experiences for users of all ages.