VocoPro Getting started, Setting Up the UHF-3200, Setting up, Recommended Not Recommended

Page 8

Getting started

Before starting any installation procedures, it is recommend that you completely unpack all of the package contents. The original packaging should be kept in the event that re-shipping is needed. Upon unpacking the UHF-3200, you should have received the following items:

UHF-3200 receiver (1)

AC power adapter (1)

Handheld microphones (2)

3 ft. male/male ¼” cable (1)

1.5 V AA batteries (4)

Removable Antennas (2)

Setting Up the UHF-3200

Set up the UHF-3200’s receiver in a spot where there are no barriers above the antennas or between the receiver and the microphones.

NOTE: Do not place the UHF-3200 in a space where there is something above the antennas such as a rackspace or an entertainment center.

Setting up

open space

closed space

Recommended

Not Recommended

7

Image 8
Contents UHF-3200 Table of contents Safetyinstructions FCC information U.S.A Welcome Listeningfor a lifetime Specifications and features SpecificationsFeatures Transmitter microphonesSetting Up the UHF-3200 Setting upGetting started Recommended Not RecommendedConnecting Getting connectedIndependent Mic Channels Mixed Mic ChannelsRear panel Front and rear panel descriptionsFront panel Microphone Handheld Microphone Battery InstallationMicrophone descriptions Microphone Placement & Tone Quality Microphone basicsOperations OperationsTroubleshooting Problems SolutionsVocopro 2005 V