Intel MIC-3358 user manual Specifications, PMC PCI Mezzanine Card IEEE1386.1 Compliant

Page 11

PMC (PCI Mezzanine Card) IEEE1386.1 Compliant

The MIC-3358 support one PMC site and compliant with PICMG 2.3 (PCI Mezzanine Card) specification. This 32-bit/33MHz PMC interface provides front access capability by PMC modules for various function demanding.

Complete I/O Functions

The MIC-3358 offers all the I/O functions of an industrial computer with the rugged Eurocard form factor. The rest of I/O have fully connected to the rear I/O module via user-define connector (J3 and J5) on the back- plane. These I/O contain one Gigabit Ethernet port, one RJ-45 COM port, two USB 2.0 ports, one VGA connector, and one PMC site. The front panel also has a reset button and LEDs for hot swap indication, power sta- tus, HDD operation and Ethernet communication. The built-in high speed IDE controller provides two separate IDE channels with Ultra DMA/33/ 66/100 mode. The user-defined J3 connector is designed to support two IDE devices, one floppy drives, one printer device, LAN 1/2 for PCIMG

2.16.These drives can simply be connected to the backplane or to the rear transition board for easy service and maintenance.

Meets Switch Fabric, Mission Critical and Computing Intensive Application requirements

Supporting the PICMG 2.16 specification, the MIC-3358 delivers a cost performance platform for those applications that demand for low power and high performance. It is an ideal platform for emerging application such as switch-fabric blade server, mission critical and computing inten- sive applications like third-generation (3G) wireless, voice over Internet protocol (VoIP), networking, image processing and the converged data and voice communication applications.

The two-layer front panel design complies with IEEE 1101.10. Connec- tors are firmly screwed to the front panel, and the replaceable shielding gasket is attached to the panel edge. This reduces emissions and gives better protection against external interference. A watchdog timer can automatically reset the system if the system stops abnormally.

1.2 Specifications

Standard SBC Functions

•CPU: Intel® Pentium® 4 processor-M u-FCPGA socket

•BIOS: Award 4Mb flash memory

3

Chapter1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MIC-3358 Http//support.advantech.com.tw Copyright NoticeAcknowledgements Technical Support and Sales AssistanceCE Notification Product warranty Packing List Contents Chapter Appendix a J2 Connector Hardware Configuration Single P2P Bridge IntroductionHigh Performance Intel Pentium 4 Processor -M Compact Mechanical DesignStandard SBC Functions SpecificationsPMC PCI Mezzanine Card IEEE1386.1 Compliant Complete I/O FunctionsPCI VGA Interface Controller ATI Rage XL PCI-to-PCI Bridge10/100/1000Base-TX Ethernet Interface Optional Rear I/O Boards MIC-3358 jumper descriptions Functional Block DiagramJumpers Jumper LocationsJP7 jumper definitions CompactFlash card Clear Cmos JP4JP1 jumper definition PMC Module Voltage Vi/o JP2 jumper definitions PMC Module Voltage VioClear Cmos JP4 ConnectorsMIC-3358 connector descriptions CN1 IDE Connector Definitions CN2 CompactFlash Socket Definitions CN3 RJ-45 COM1 port Definitions Handle Switch Definitions 10 CN4 Handle Switch Definitions12 CN6 USB 1.1/2.0 port Definitions 11 CN5 USB 1.1/2.0 port Definitions14 PU1 Gigabit LAN Connector Definitions 13 CN9 DB-15 VGA Connector Definitions15 J11/J12/J14 PMC Connector Definitions J12 PIN Signal PIN# J14 Pin Signal 17 SW1 Vcore selection definitions 16 D9 LED Definitions18 SW2 Drone mode definitions Its automatic selection when SW1-1~SW1-6 are all OFFMIC-3358 jumper and connector locations MIC-3358 front panel connector and indicator locations Safety PrecautionsInstalling CPU and Heat Sink Software support Complete assembly with heat sink and hard diskMIC-3358 User’s Manual Connecting Peripherals IDE Device CN1 and Rear I/O VGA Display Connector CN9 or Rear I/OPS/2 Keyboard and Mouse Connector Rear I/O Serial Ports CN3 and Rear I/O Ethernet Configuration PU1 , Rear I/O and J3MIC-3358 serial port default settings CompactFlash Socket CN2 USB Connector CN5/6 and Rear I/OPMC Connector J11, J12, J14 Card InstallationTo remove a card To install a cardMIC-3358 User’s Manual Driver Setup USB driver OverviewWindows 2K Driver CMM Chassis Management Module DriverClick Next in Hardware Wizard Select Add a new device in Device windows Select Other devices in Hardware types windows Browse proper driver in CD ROM device 11 click ok in Add New Hardware Wizard Properties windows 13 click Next in Add/Remove Hardware Wizard windows 15 click Yes to restart your computer 17 Right click My Computer to select Properties Windows XP Driver19 Click Next in the windows Page 23 Select Show all devices in Common hardware types windows 25 Select proper driver in CD-ROM 27 Click Next 29 Go to My computer to see A-IPM drivers MIC-3358 User’s Manual Award Bios Setup Entering Setup Award Bios SetupAdvance Bios Features Setup Standard Cmos SetupQuick Power On Self Test Advance Bios features setup screen Virus WarningSwap Floppy Drive First/Second/Third Boot Device and Boot Other DeviceBoot Up Floppy Seek Boot Up NumLock StatusTypematic Rate Chars/Sec Typematic Rate SettingTypematic Delay Msec Apic Mode Advanced Programmable Interrupt ControllerSmall logo EPA show Advance Chipset Features SetupActive to Precharge Delay Dram RAS# to CAS# DelayDram RAS# Precharge Dram Data Integrity ModeSystem Bios Cacheable Video Bios CacheableIntegrated Peripherals Delayed TransactionUSB Controller On-Chip Primary/Secondary PCI IDEIDE Primary/Secondary Master/Slave PIO IDE Primary/Secondary Master/Slave UdmaIDE HDD Block Mode SMBus ConnectorLAN 1 Connector LAN 2 ConnectorOnboard Parallel Port Power Management SetupParallel Port Mode ECP Mode Use DMAResource Controlled By 7 PNP/PCI Configuration SetupReset Configuration Data Acpi FunctionPCI/VGA Palette Snoop Load Optimized DefaultsPC Health Status IRQ ResourcesExit Without Saving Set PasswordSave & Exit Setup Load Optimized Defaults Y/N ? NMIC-3358 User’s Manual Programming Watchdog Timer REM Subroutine #1, your application task Programming the Watchdog Timer70 X=INP &H043 REM, Disable the watchdog timer Gosub 2000 REM Your application task #2REM Subroutine #2, your application task MIC-3369 User’s Manual Pin Assignments Table B.1 J1 connector J1 ConnectorTable B.2 J2 connector J2 ConnectorTable B.3 J3 connector J3 ConnectorTable B.4 J5 connector J5 ConnectorTable B.5 System I/O ports System I/O PortsTable B.7 1st MB memory map Interrupt Assignments1st MB Memory Map Table B.6 Interrupt assignmentsMIC-3358 User’s Manual

MIC-3358 specifications

The Intel MIC-3358, also known as the Intel Many Integrated Core (MIC) architecture, represents a pivotal innovation in high-performance computing and parallel processing. This product is part of Intel's Xeon Phi family and was specifically designed to tackle demanding workloads, making it a popular choice for research institutions and industries requiring significant computational power.

One of the standout features of the MIC-3358 is its many-core architecture, which integrates numerous processor cores on a single chip. This allows for massively parallel processing capabilities, enabling the execution of multiple tasks simultaneously. With a total of 60 cores, the MIC-3358 can deliver exceptional performance for applications such as scientific simulations, data analytics, and machine learning.

The architecture of the MIC-3358 is notable for its x86 compatibility. Unlike traditional GPUs, the MIC-3358 can run standard x86 applications unmodified, ensuring seamless integration into existing workflows and simplifying development. This feature helps users leverage their existing software tools and libraries without requiring extensive porting or adaptation.

Another key technology is the incorporation of advanced memory architecture, featuring a high-bandwidth memory system. The MIC-3358 supports GDDR5 memory, enabling rapid data transfer rates that are crucial for performance-intensive applications. This, combined with an efficient memory architecture, helps overcome memory bandwidth limitations often encountered in high-performance computing.

The MIC-3358 also includes support for Intel's advanced vector extensions (AVX) and AVX-512, which enhance the processing of vector operations and allow for more efficient data handling. This makes the MIC-3358 particularly effective for workloads that involve large datasets and require complex mathematical computations.

Energy efficiency is another defining characteristic of the MIC-3358. Despite its high core count, the architecture is designed to deliver optimal performance per watt, making it suitable for large data centers where power consumption is a crucial factor.

In summary, the Intel MIC-3358 stands out due to its many-core architecture, x86 compatibility, high-bandwidth memory support, advanced vector instructions, and energy efficiency. These features collectively position it as a powerful solution for high-performance computing challenges, enabling a wide array of applications across various sectors. As the demand for computational resources continues to grow, the MIC-3358 remains a vital component in the landscape of advanced computing technologies.
Top Page Image Contents