ViewSonic PJD6381 Adjusting the Projector Height, Adjusting the Projector Focus, EN-16

Adjusting the Projector

Adjusting the Projector Height

Tilt-adjustment foot

Elevator foot

Elevator button

The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image:

1.To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.

2.To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.

„To avoid damaging the projector, make sure that the elevator foot and tilt- adjustment foot are fully retracted before placing the projector in its carrying case.

Adjusting the Projector Focus

Focus ring

1.Focus the image by rotating the focus ring. A still image is recommended for focusing.

EN-16