ViewSonic PJD6544W, PJD6345 warranty Troubleshooting, Start-up problems, Image problems

Page 75

Troubleshooting

Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well.

Start-up problems

If no lights turn on:

Be sure that the power cord is securely connected to the projector and the other end is plugged into an outlet with power.

Press the power button again.

Unplug the power cord and wait for a short while, then plug it in and press the power button again.

Image problems

If the searching source is displayed:

Press SOURCE on the projector or Source on the remote control to select an active input source.

Be sure the external source is turned on and connected.

For a computer connection, ensure your notebook computer’s external video port is turned on. Refer to the computer manual.

If the image is out of focus:

Be sure the lens cover is removed.

While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom, not the focus.)

Check the projection lens to see if it needs cleaning.

If the image is flickering or unstable for a computer connection:

Press Auto Sync on the remote control.

Press MENU on the projector or Menu on the remote control, go to Video/Audio and adjust Frequency or Tracking.

Remote control problems

If the remote control does not operate:

Be sure nothing is blocking the remote control receiver on the front of the projector. Use the remote control within the effective range.

Aim the remote control at the screen or at the front or back of the projector.

Move the remote control so it is more directly in front of or behind the projector and not as far to the side.

68

Image 75
Contents PJD6345/PJD6544w DLP Projector CE Conformity for European Countries Compliance InformationFCC Statement For CanadaImportant Safety Instructions Substance Proposed Maximum Actual Concentration Declaration of RoHS2 ComplianceCopyright Information Product RegistrationFor Your Records Page Table of contents Introduction Projector FeaturesPackage Contents Front View Projector OverviewBottom View Rear ViewControl Panel Keystone/Arrow keys /Up, /DownENTER/Arrow key /Right Connection Ports RS-232LAN Audio Audio OUTRemote Control Pattern Color ModeVolume TimerUsing the remote mouse control Installing the Batteries Remote Control Operation Connection Connecting a computer or monitor Connecting a computerTo connect the projector to a notebook or desktop computer Connecting a monitor To connect the projector to an Hdmi source device Connecting Video source devicesConnecting an Hdmi source device Connecting a Component Video source deviceConnecting an S-Video source device To connect the projector to a Component Video source deviceTo connect the projector to an S-Video source device Connecting a composite Video source device Playing sound through the projectorTo connect the projector to a composite Video source device About the microphone input Powering On/Off the Projector Powering On the ProjectorPowering Off the Projector Adjusting the Projector Zoom and Focus Adjusting the Projector HeightAdjusting Projection Image Size PJD6345PJD6544w Page Locking control keys Selection Description Setting the presentation timerMenu operation How to operateMenu tree Main Menu Sub Menu SettingsDC12V CEC Reference Mode BrightnessContrast White Intensity Color SettingDynamic Mode User Color3D Invert 3D Settings3D Sync 3D FormatZoom Video SettingAudio Setting Menu SettingQuick Power Off Auto Power OffSleep Timer Standby Setting NetworkLAN Control Setting Wired LAN Smart RestartWirless LAN Factory Default PasswordPresentation Timer Lamp SettingMAC Address ResolutionInput Source Lamp HoursIf you are in a non-DHCP environment Wired connectionControlling the projector through a LAN environment If you are in a Dhcp environmentWireless connection About AP and Client modes Controlling the projector through a web browser About Crestron control Iv. Press Exit to go back to the remote network operation IP ID Category Item Input Length Maximum NumberCrestron RoomView Downloading and installing vsPresenter Using vsPresenterDisplaying images through vsPresenter Page Icon Description Displaying pictures with a USB storage device Photo modeDisplaying a picture Slideshows Audio mode When audio is playing Video mode When video is playing Office file list is displayed on the screen Office Viewer modeVideo Description SettingsWhen Office file is displaying System DescriptionImages Supported file formatsSubtitle Up to 15MB Password-pro Cleaning the Projector Housing Cleaning the LensType number PJD6345 RLC-084 PJD6544w Replacing the LampPage Specifications Ceiling mount installation DimensionsLED Type Color Status Meaning LED Indicator MessagesCompatibility Modes ComputerVideo Troubleshooting Start-up problemsImage problems Sub 9 pin Wire List RS-232 Command and ConfigurationFunction Action Control Code Page System Code 83F4 Format NEC IR Control CodeKey Format Byte1 Byte2 Byte3 Byte4 = FAX Customer SupportLimited Warranty Effect of local law How to get serviceLimitation of implied warranties Exclusion of damagesViewSonic Projector Mexico Limited WarrantyVSCTEMP2006

PJD6345, PJD6544W specifications

The ViewSonic PJD6544W and PJD6345 are two prominent models in the realm of portable projectors, designed to deliver exceptional performance for both educational settings and business environments. Known for their advanced features and reliable technology, these projectors cater to users seeking high-quality visuals and user-friendly operation.

One of the key highlights of both projectors is their high brightness levels. The PJD6544W boasts an impressive brightness of 3,200 lumens, while the PJD6345 offers a slightly lower brightness of 3,000 lumens. This makes both models suitable for use in well-lit rooms, ensuring that presentations and videos maintain visibility without compromising clarity.

The resolution of the PJD6544W is another noteworthy aspect; it features a native WXGA resolution of 1280 x 800 pixels, providing a wider aspect ratio ideal for high-definition content. The PJD6345, on the other hand, offers a native SVGA resolution of 800 x 600 pixels, which is still effective for standard presentations. These resolutions allow for sharp images and vibrant colors, enhancing the viewing experience.

In terms of technology, both projectors utilize DLP (Digital Light Processing) technology, which contributes to improved color accuracy and overall image quality. DLP projectors are known for their longevity and low maintenance, as they do not rely on filters that require regular replacements. This makes both the PJD6544W and PJD6345 reliable choices for users who value performance and durability.

Moreover, the integration of BrilliantColor technology in these models enhances the color range significantly, allowing for brighter yellows and richer hues. This feature is vital in educational and professional contexts where visual engagement is key to effective communication.

Portability is another strong suit of these projectors. Weighing just around five pounds and featuring compact designs, both the PJD6544W and PJD6345 are easy to transport between different locations, making them ideal for users who regularly deliver presentations outside their usual environment.

For connectivity, the PJD6544W and PJD6345 come equipped with a variety of options, including HDMI, VGA, and USB ports, ensuring compatibility with a range of devices, from laptops to media players. These versatile connectivity options simplify the setup process and enhance user convenience.

In conclusion, the ViewSonic PJD6544W and PJD6345 projectors stand out in the market due to their powerful brightness, high-resolution imaging, DLP technology, and user-friendly features. Whether for classroom instruction or corporate presentations, these projectors provide consistent performance that meets the needs of modern users while maintaining portability and efficiency.