Intel 654655-001 manual Configuring the Snmp agent for IP, To configure a port for full duplex

Page 24

C H A P T E R 2 Intel Express 100BASE-TX Switching Hub

NOTE

You must have a point-to- point connection to establish a full-duplex connection (shared hubs/repeaters/ concentrators aren’t capable of full duplex). Additionally, both points of the connection must be configured for full duplex.

To configure a port for full duplex

1Configure the adapter or switch port on the other end for full duplex.

2Set the Express Switching Hub port to full duplex. This example sets port 3 to full duplex:

set-port-dplex 3 full

3Check the FC/FD LED. It should be solid yellow, indicating full duplex.

Configuring the SNMP agent for IP

Commands used

set-ip-conf

ping

Sets IP address, netmask, and broadcast address.

Contacts another IP device.

The switch can be monitored and controlled through any SNMP- compliant network management system (NMS). First, you must configure the SNMP agent by assigning an IP address.

To configure the SNMP agent

1Set the IP configuration. Type the command:

set-ip-conf 192.1.1.64 255.255.255.0 192.1.1.255

If the switch doesn’t have an IP address, then the specified IP configuration is changed immediately and saved in NVRAM.

If the switch is already configured, the command changes only the NVRAM. To use the new parameters, reset the switch using the warm-resetcommand.

2Test the installation. Type the command:

SYS_console> ping 192.1.1.1 2

This example tests connectivity from the switch to a workstation with an IP address of 192.1.1.1. For more information on the ping command, see page 33.

3Download the MIB from Intel’s Customer Support World Wide Web site (http://www-cs.intel.com). The file is compressed in the file SWCH1MIB.EXE.

4Compile the MIB into your NMS. See your NMS documentation for more information.

20

Page 23 Page 25
Image 24
Page 23 Page 25
Contents User Guide First edition Contents Index Customer Support Inside back cover Check the LEDs for power and links. See pages 6 Next steps OptionalOptional Quick Start for Snmp Management Press Eand log into the Console ManagerTopology OverviewFeatures Installation and Setup Install the switch in a rack or on a shelfUsing the Switch Port status LEDsManagement status LEDs Console MgmtCabling Requirements UTP requirementsFiber optic requirements Straight-through vs. crossover cables Determining which cable to useTypical Configurations Configuring the 100 Mbps workgroup environmentConfiguring the Wide Area Network WAN environment SwitchesConnecting to a 10 Mbps segment Sharing, or switching hubExcessive flow control problems Repeater count limitationsPage Configuring Accessing the Console Manager Baud, eight data bits, no parity, one stop bitUsing the Console Manager Entering commandsVlan Console Manager command groups Configuring a port for full duplexCommands used Configuring the Snmp agent for IP To configure a port for full duplexTo configure the Snmp agent Monitoring traffic To check traffic on a portCreating VLANs To create an Svlan To create a VBDConfiguring the spanning tree Creating custom filtersConsole Command Reference To set a custom filterLogin Help-kbdBanner ClearSystem commands LogoutSet-prompt Set-passwdWarm-reset Cold-resetSys-stat Get-last-err Init-nvramSet-line-slip Set-sw-fileIP commands Set-par-fileSet-fg-param Start-fgGet-ip Get-ip-confSet-ip Get-bootp Set-bootpSet-ip-conf Get-slipA P T E R Ping-stop Get-arp-tblSnmp commands Add-arp-entryDel-arp-entry Get-commSet-comm Get-authSet-auth Get-trapsSwitching database commands Add-trapDel-trap Lock Self Dport Get-lt-16 FF-FF-FF-FF-FF-FF Custom FilterFind-lt-addr Del-lt-entryDel-lt-addr Add-lt-entry Get-lt-ageSet-lt-age Get-lt-filter Add-cf-entryDel-cf-entry Get-nv-cftblGet-nv-cfilt Vlan commands Get-con-matrixGet-vbc-matrix Set-vbc-domain Del-vbc-domainGet-vbc-tbl Set-sec-vlanSpanning tree commands Get-stp Set-stpGet-st-bcfg Get-st-pcfgSet-br-hellot Set-br-fwdelSet-prt-prio Set-prt-enbPort configuration commands Get-port-cfgSet-port-dplex Switching statistics commands Set-port-fctrlClr-cnt Get-eth-cntGet-colls-cnt Get-rmon-cntGet-br-cntget-br-cntport-number Get-mgm-brcnt Displays the counters for the management interfaceConsole command-line summary Console CommandsSystem Commands IP CommandsIP Commands con’t Snmp CommandsSwitching Database Commands Virtual LAN Vlan Commands Spanning Tree CommandsPort Configuration Commands Switching Statistics Commands Page Troubleshooting A P T E R 3 Intel Express 100BASE-TX Switching Hub Default Configuration SystemPorts Specifications FeaturesConsole Manager Spanning treeStatus Indicators per port General IndicatorsBoot and Configuration Connector InterfacesElectrical Specifications Power Cord SpecificationsElectromagnetic Emissions and Safety Agency Approval MountingSnmp and MIB Support Custom Filter Port Table Source PortsSource Ports con’t Destination Ports Destination Ports con’t Destination Ports con’t Limited Warranty Page Index Intel Express 100BASE-TX Switching Hub Intel Express 100BASE-TX Switching Hub MIB Snmp Wide Area Network WAN configuration Xmt Transmit LED Intel Automated Customer Support

654655-001 specifications

The Intel 654655-001 is a high-performance embedded computing platform designed to support a variety of industrial and commercial applications. As part of Intel's robust family of processors, it integrates a combination of innovative technologies that enhance both processing capabilities and energy efficiency.

One of the standout features of the Intel 654655-001 is its multi-core processor architecture. This allows for efficient multitasking and improved performance in demanding applications. The multi-core design is particularly beneficial for real-time data processing, which is crucial in sectors like manufacturing, telecommunications, and automotive systems.

The processor supports advanced power management technologies, ensuring optimal energy efficiency while maintaining robust performance levels. This is particularly important for embedded systems, where power consumption directly affects operational costs and sustainability. Intel's Intelligent Power Management technology allows the system to adaptively adjust power usage based on workload demands, leading to substantial energy savings.

In addition to its powerful processing capabilities and energy efficiency, the Intel 654655-001 also features integrated graphics. This allows for high-quality visual outputs, making it suitable for applications that require graphical interfaces or advanced visualization. The integrated graphics also alleviate the need for dedicated GPUs, streamlining designs and reducing component costs.

Another vital aspect of the Intel 654655-001 is its support for a wide array of connectivity options. The platform is designed to facilitate seamless communication with various peripherals and networks, making it highly versatile for different applications. Support for industrial standards like PCIe and USB ensures compatibility with numerous devices, enhancing its integration into existing systems.

Furthermore, the Intel 654655-001 benefits from a robust security framework, essential for protecting sensitive data and maintaining operational integrity. Features like Intel Trusted Execution Technology help secure the platform against potential threats, making it an ideal choice for industries that handle confidential information.

Overall, the Intel 654655-001 combines powerful processing capabilities, energy efficiency, integrated graphics, versatile connectivity, and robust security features, making it an ideal solution for modern embedded computing needs across various sectors. Its adaptability and reliability position it as a preferred choice among engineers and developers seeking high-performance embedded systems.
Top Page Image Contents