Eiki EVW-100 owner manual Attach Imager Box to Projector, Latch Button, Connector Plug

Page 5

Attach Imager Box to Projector

CAUTION : Turn off the projector when attaching the Imager Box to the projector.

Do not attach or remove while the projector is turned on. It may damage the equipment.

1Remove 4 covers attached to a projector. Insert the MOUNTING HOOKs (A) into the projector to the arrow direction. (Fig.-1)

2Plug the CONNECTOR PLUG into the DVI Terminal of the projector while pressing the Imager Box LATCH BUTTON, and release it.

(Fig.-1)

cover

Remove 4 covers.

LATCH BUTTON

(A)

(Fig.-2)

DVI Terminal

	COMPUTER IN	VIDEO	Pb / Cb – Pr / Cr
	DIGITAL	R – AUDIO IN – L (MONO) Y –	Pb / Cb – Pr / Cr
		S – VIDEO AUDIO IN	R – AUDIO OUT – L
		COMPUTER
The SWITCH BUT-	MCI
TON of the Imager		ANALOG
		COMPUTER IN	USB CONTROL PORT
			USB CONTROL PORT
Box is placed on
the switch of the
projector.

CONNECTOR

PLUG

English

5

Image 5

Contents Media Card Imager Kit Federal Communication Commission Notice CompliancesContents of Media Card Imager Kit Table of ContentsImager Box Name of Each Part of Imager BoxLatch Button Connector PlugAttach Imager Box to Projector Load and Remove CF Card Remove Imager Box from ProjectorImportant Note Use CF Card AdapterHandle CF Card and Adapter Imager Box SpecificationsPage Menu BAR Image Playback Operating ProjectorInput Menu Selecting Input SourceIndex View Menu Selecting IndexSelecting Off Auto Play FunctionImage Level Select Menu Operation Image Level Select Direct OperationImage Select Menu Image SelectImage Adjust Menu Image Level AdjustmentImage Adjust Image Level SET MenuScreen Menu Picture Size Adjustment