Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt or spots will project on the screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first.
Warning
Never open any of the covers on the projector. Dangerous electrical voltages inside the projector can cause severe injury. Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Cleaning the Lens
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.
Cleaning the Projector Housing
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.
Turn off the projector and remove the AC power cord from the power outlet before beginning maintenance work.
Make sure the lens is cool before cleaning.
Do not use detergents or chemicals other than those noted above. Do not use benzene or thinners.
Do not use chemical sprays.
Use a soft cloth or lens paper only.
PJD5133/PJD5233/PJD5523w DLP Projector
Compliance Information
Important Safety Instructions
Declaration of RoHS Compliance
Copyright Information
Document Number
Ground
Contents
Projector Features
Introduction
Package Contents
Projector Overview
Front View
Rear View
Bottom View
Using the Product
Power
Control Panel
Keystone/Arrow keys /Up, /Down
Connection Ports
RS-232
Remote Control
Volume
Video/Page Up
ESC/Page Down
Enter
Installing the Batteries
Remote Control Operation
Connection
Connecting a computer or monitor
Connecting a computer
Connecting a monitor
To connect the projector to a notebook or desktop computer
Connecting Video source devices
Connecting an Hdmi source device
To connect the projector to an Hdmi source device
Reference
Connecting a Component Video source device
Connecting an S-Video source device
To connect the projector to a Component Video source device
To connect the projector to an S-Video source device
Connecting a composite Video source device
To connect the projector to a composite Video source device
Powering On/Off the Projector
Powering On the Projector
Powering Off the Projector
Operation
Adjusting the Projector Height
Adjusting the Projector Zoom and Focus
Adjusting Projection Image Size
Offset
Inch cm Min. zoom Max. zoom
Screen size 16 10 Screen
Projection distance inch m Image Vertical
Locking control keys
Confirm
Setting the presentation timer
Selection Description
Menu Operation
For PJD5523w only
How to operate
User Color
White Intensity
Gamma
Aspect Ratio
Video Setting
Audio Setting
Setting Projector Projection
Menu Setting
Password
Presentation Timer
Lamp Setting
Factory Default
Resolution
Lamp Hours
Maintenance
Cleaning the Lens
Cleaning the Projector Housing
Replacing the Lamp
Page
Specifications
Svga XGA Wxga
Dimensions
Ceiling mount installation
LED Indicator Messages
Appendix
LED Type Color Status Meaning
Resolution Sync KHz Sync Hz
Compatibility Modes
Computer
Compatibility Resolution Sync KHz Sync Hz
Video
Troubleshooting
Start-up problems
Image problems
RS-232 Command and Configuration
Function Action Control Code Return
Factory BE,EF,03,06,00,6B,DA,6E,00,00,00,00,00
Wire List
Sub 9 pin
IR Control Code
Customer Support
What the warranty covers
Limited Three 3 year General Warranty
Limited One 1 year Heavy Usage Warranty
Who the warranty protects
How to get service
Limitation of implied warranties
Exclusion of damages
Effect of state law
Mexico Limited Warranty
What the warranty covers
Who the warranty protects
What the warranty does not cover
Merida