Using the Remote Control
Power 
* Refer to the “Power On/Off the Projector” section on
Sync
* Automatically synchronizes the projector to the input source.
Keystone
* Adjusts image distortion caused by the tilting of the projector (±16 degrees).
Display Format
* Display the “Display Format” section of the onscreen display menu to select the desired aspect ratio.
Laser Button 
* Aim the remote at the viewing screen, press and hold this button to activate the laser pointer.
A/V Mute
* Momentarily turns off the audio and video.
Freeze
* Press “Freeze” to pause the screen image.
Display Mode
*Select the display mode from PC, Movie, Game, sRGB, Dynamic and User.
Mouse/Mouse Right Click/Mouse Left Click (*)
* These functions are the same as a mouse of PC or Mac.
Page Up 
(*)
* Use this button to page up.
Page Down 
(*)
* Use this button to page down.
Page Scrolling(*)
* Control the scroll bar to move the screen up or down.
Zoom In 
/Zoom Out 
*Press 
or 
button to zoom the lens in or zoom out.
Four Directional Select Keys
*Remark:”*” this is com- puter mode only. And these functions are only available when the projec- tor is connected to a com- puter via an USB cable.
* Use 
to select items or make adjustments to your selection.
OK 
* Confirm your selection of items.
Source Lock
* Select auto detection all connector ports or lock current connector port.
Menu 
* Press “Menu” to launch the on screen display menu. To exit OSD, press “Menu” again.
VGA
*Press “VGA” to change source to
DVI-I
*Press
Component
*Press “Component” to change source to component connector. This connector supports YPbPr (480p/576p/720p/1080i) and YCbCr (480i/576i).
S-Video
* Press
Video
* Press “Video” to change source to Composite Video source.
ViewSonic PJ755D | 16 |