Remote Control
1 | Power |
| Turn the projector on or off. |
2 | VGA |
| Switch input source to Computer |
| in 1 (analog RGB or component)/ |
| Computer in 2 (analog RGB or |
| component) by sequence. |
3 | Source/Page up |
| Display the source selection bar. |
| Perform page up function when |
| mouse mode is activated. |
4 | Up/+, Down/- |
| When Magnify or Volume button is |
| activated, use them to adjust the |
| values. |
5 | Left/Mute |
| When the |
(OSD) menu is not activated, this button is used as mute function.
6Menu
Display
7Magnify
Zoom in and out the images.
8Function
User definable key for customized function.
9Slide show
Activate the slide show function when the input source is USB reader.
10Color Mode
Change the color setting by sequence.
11MouseSwitch between the normal and mouse modes.
12Blank
Cut off the screen temporarily. Press again to cancel the Blank Screen function.
| 13 | |
| 14 | |
3 | 15 | |
16 | ||
4 | ||
17 | ||
5 | ||
18 | ||
4 | ||
19 | ||
6 | ||
7 | 20 | |
8 | 21 | |
9 | 22 | |
10 | 23 | |
11 | 24 | |
25 | ||
12 |
13Laser
Aim the remote at the viewing screen, press and hold this button to activate the laser pointer.
14Video
Switch input source to Composite/S- Video/component by sequence.
15HDMI
Display HDMI signal.
16Auto/Page down
Resynchronize the projector to the input signal from a computer. This function is available for computer mode only.
Perform page down function when mouse mode is activated.
ViewSonic Pro8450w | 13 |