ViewSonic VS12617 manual Description of each menu, Hsg

Description of each menu

Feature	Description	min	Max	Default
Blank Screen	Allows you to select which logo screen will display during	N/A	N/A	ViewSonic
	projector start-up.
Keystone	Vertical Keystone function by using DDP2230 of “TI”	-30	+30	0°
	chip to provide vertical keystone correction
	Aspect Ratio allows the user to set the aspect ratio of the
	image displayed on the projector. This is helpful when the
	input resolution is not at the native resolution of the
Aspect Ratio	content or if the user wishes to fill the projector.	N/A	N/A	Fill
	1. Fill
	2. Native
	3. 4:3
	4. 16:9
Magnify	To zoom in the details one the projected screen.	0	100	0
	User can choose different mode. Such as User, VGA,			PC: VGA
Mode	Video and ViewMatch.	N/A	N/A	Component:
				Video
	When Picture mode is selected on User mode, this
	function can be active.
Brightness	Adjusts the brightness of the image. The higher the setting	-100	100	0
	the brighter the image. And the lower the setting, the
	darker the image.
	When Picture mode is selected on User mode, this
	function can be active.
Contrast	Adjusts the degree of difference between the dark and	-50	50	0
	light in the image. The higher the value, the greater the
	contrast.
	When Picture mode is selected on User mode, this
Sharpness	function can be active.	0	31	16
	Adjusts the image to make it look sharper. (At higher
	values, will switch to Detail Enhancement)
Color Space	User can set different Color Space such as Auto, RGB,	N/A	N/A	Automatic
	YCbCr and YPbPr.
Noise	Reduce signal noise. But depends on the input signal.	ON	OFF	ON
Reduction
Lamp Reset	To reset the lamp hours after replaced the lamp.	NA	NA	NA
Factory Reset	Return to the factory pre-set value.	NA	NA	NA
HSG	Refer to Page 16, “Fine-tuning the image quality in user	NA	NA	NA
	modes”
	Shows the input source.
Active Source	1. VGA	NA	NA	NA
	2. Component
Resolution	Shows the current input resolution.	NA	NA	NA
Lamp Hours	Shows the current lamp using hours.	NA	NA	NA

The following setup value will be changed after calibration.

Phase	Adjusts the clock phase to reduce image distortion.
Tracking	Adjusts the image size to fit the screen
Horizontal	Adjusts the horizontal width of the image.
Position
Vertical	Adjusts the Vertical width of the image.
Position

17

ViewSonic PJD2121