How to Build a Cluster - Intel® Server Board S5000PAL
Server Management
The S5000PAL server board comes with a variety of management utilities for updates and maintenance. The Intel System Management Software package will enable remote maintenance and management of the cluster nodes from a centralized system. Download the package here:
external/filter_results.aspx?strTypes=all&ProductID=2363&OSFullName=All+Operating+Systems&la ng=eng&strOSs=All&submit=Go%21
The Intel System Management Software provides a lower level of management to the user for remote operations and maintenance. Download the package here:
BIOS and Firmware Provisioning
At times it may become necessary to update some or all nodes to the latest revisions of BIOS and Firmware and set all the required BIOS settings for optimal performance. This section explains how this is accomplished in a multi node compute cluster using existing recipes available from the Intel ESAA web site. Once you have assembled your cluster and are ready to perform any or all BIOS and Firmware provisioning, go to the following website and download the recipe “BIOS and Firmware Provisioning for Intel© Server Board S5000PAL.”
This recipe illustrates in detail how to build a PXE boot environment on a Red Hat RHEL 4 U3 server. This will allow the cluster nodes to boot up and automatically update the necessary BIOS depending on what is required. It is a fully configurable custom DOS boot image. It is assumed that the user will have a working understanding of DOS and how to make, edit and automate batch files and executables. For the Intel® Server Board S5000PAL, go to the website below to download the most current BIOS update package:
external/filter_results.aspx?strTypes=all&ProductID=2451&OSFullName=All+Operating+Systems&la ng=eng&strOSs=All&submit=Go%21
Unzip these files and place them into the DOS image created from the provisioning recipe above. Modifying some of the batch files may be needed. To execute multiple batch files from within a bootable DOS image, modify the autoexec.bat to call other batch files. An example autoexec.bat file is included in the update download.
Once each node has been booted to the DOS image it will go through the entire update as specified in the autoexec.bat file. Once finished, it will wait for a prompt from the user. At this point each node will be ready to be rebooted manually, via Intel® AMT or with Intel® System Management.
12