Grounded | Bel Canto Design DAC3.5VB guide

Fuse replacement:

This appliance is fitted with a non-rewireable 10 amp mains plug. The plug contains a 10 amp fuse. If the fuse has blown it can be replaced as follows:

a)Pull out the black fuse cover/carrier.

b)Remove and dispose of the blown fuse.

c)Fit a new 10 amp BS1362 approved fuse into the carrier and push the carrier back into the plug.

Bel Canto Design Ltd. declare that this product is in conformance with the Low Voltage Directive 73/23/EEC and Electromagnetic Compatibility 89/336/EEC as amended by 92/31/EEC and 93/68/EEC.

The conformity of the designated product with the provisions of Directive number 73/23/EEC (LVD) is proved by full compliance with the following standards:

EN60065 2002 General requirements

Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug. Contact your Bel Canto retailer to obtain a replacement fuse cover. Fuses are for fire protection and do not protect against electric shock.

WARNING: THIS APPLIANCE MUST BE

GROUNDED.

The conformity of the designated product with the provisions of Directive number 89/336/EEC (EMC) is proved by full compliance with the following standards:

EN55013 2001 Conducted emissions

EN55013 2001 Absorbed emissions

EN55020 2002 Immunity

The conformity of the designated product with the provisions of Directive number 2005/32/EC ecodesign requirements is proved by full compliance with the ‘off mode’ setting power of 0.0 Watts.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

DAC3.5VB specifications

The Bel Canto Design DAC3.5VB is a highly regarded digital-to-analog converter that stands out for its exceptional sound quality and advanced technological features. This model is part of Bel Canto's renowned lineup, celebrated for its superb engineering and distinctive approach to audio reproduction.

One of the core features of the DAC3.5VB is its innovative digital signal processing technology. It employs a high-performance digital filter that provides exceptional detail and clarity, allowing listeners to experience their music as it was intended. The use of a sophisticated multi-bit Delta-Sigma architecture ensures that sound reproduction is both accurate and natural, effectively rendering both subtle nuances and complex musical passages.

The DAC3.5VB supports a variety of digital input formats, including USB, optical, and coaxial connections. The USB input is particularly noteworthy, as it utilizes the latest asynchronous technology to eliminate jitter, resulting in a cleaner signal and superior audio quality. This allows users to connect the DAC to their computers or streaming devices with ease, making it a versatile addition to any audio system.

Another significant aspect of the DAC3.5VB is its dual-mono design, which ensures that each channel operates independently, minimizing crosstalk and providing a more immersive stereo image. This design philosophy contributes to the DAC's ability to deliver deep soundstage and precise imaging, making it a favorite among audiophiles.

Additionally, the DAC3.5VB incorporates Bel Canto's proprietary analog output stage, which is engineered to minimize distortion and enhance dynamic range. This output stage is paired with high-quality components that offer low noise and a greater sense of dynamism to recordings, resulting in an engaging listening experience.

The build quality of the DAC3.5VB is also commendable, featuring a rugged chassis that reduces electromagnetic interference. Its aesthetically pleasing design makes it a stylish component for any high-end audio setup.

In summary, the Bel Canto Design DAC3.5VB is a sophisticated digital-to-analog converter that combines advanced technology with a commitment to audio excellence. With features like precision digital processing, multi-format compatibility, and an independent dual-mono design, it offers an unparalleled listening experience that caters to both casual listeners and serious audiophiles alike. Its remarkable performance and elegant design make it a standout choice in the world of high-fidelity audio.