Control the projector
2 Set a time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes].
3 Select an event “ON” or “OFF”.
Select an event ON or OFF with the
4 Register an event
Click Set button to register the set timer event. Repeat steps 1 to 4 for another timer event setting.
Check the Timer events
To check the set timer events, click on the Timer Check linked text.
Getting the current time
The displayed time is the value set when the setting page was displayed. This time value is not updated automatically. To update the display time click Refresh button.
Network Unit
OWNER’S MANUAL
ENGLISH
51