Eiki MODEL LC-SB10 owner manual Video Input Image Level Adjustment, Image Adjust Menu

Page 34

VIDEO INPUT

IMAGE LEVEL ADJUSTMENT

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button(s) to move the
	red frame pointer to the IMAGE ADJUST Menu icon.
2	Press the POINT DOWN button to move the red frame pointer to
	the item that you want to adjust and then press the SELECT

IMAGE ADJUST MENU

Move the red frame pointer

IMAGE ADJUST

button. The level of each item is displayed. Adjust each level by pressing the POINT LEFT/RIGHT button(s).

Contrast

Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter. (From 0 to 63.)

Color

to the item to be selected and then press the SELECT button.

Menu icon

Press the POINT LEFT button to lighten color and the POINT RIGHT button to deepen color. (From 0 to 63.)

Tint

Press the POINT LEFT button or the POINT RIGHT button to obtain proper color. (From 0 to 63.)

Press the POINT LEFT/RIGHT but- tons to adjust value.

Press the SELECT button at this icon to display other items.

White balance (Red)

Press the POINT LEFT button to lighten red tone and the POINT RIGHT button to deepen red tone. (From 0 to 63.)

White balance (Green)

Press the POINT LEFT button to lighten green tone and the POINT RIGHT button to deepen green tone. (From 0 to 63.)

White balance (Blue)

Press the POINT LEFT button to lighten blue tone and the POINT RIGHT button to deepen blue tone. (From 0 to 63.)

Sharpness

Press the POINT LEFT button to soften the image and the POINT RIGHT button to sharpen the image. (From 0 to 15.)

Gamma

Press the POINT LEFT button or the POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.)

Auto grayscale

When this function is "ON", it automatically enhances contrast of bright and dark part of image.

Auto fleshtone

When this function is "ON", it automatically produces more vivid image according to image condition.

Press the SELECT button at this icon to display previous items.

Press the POINT LEFT/RIGHT but- tons to adjust value.

Press the SELECT button at this icon to store the value.

NOTE

●Tint cannot be adjusted when the video system is PAL, SECAM, PAL-M or PAL-N.

34

Image 34

Contents Model LC-SB10 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Color Systems Features and DesignComputers Component VideoPreparation Name of Each Part of ProjectorFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord For the U.S.A. and CanadaPreparation Positioning Projector Adjustable FeetRoom Light Preparation Installing Projector in Proper Position Moving ProjectorVideo Input Jack Audio Input Jacks Connecting ProjectorTerminals of Projector Computer Input DIGITAL/ANALOGConnecting to Computer Terminals ProjectorConnecting to Video Equipment TerminalsBefore Operation Operation of Remote ControlDIP Switch in the Battery Compartment Laser Pointer FunctionRemote Control Batteries Installation TOP Controls and Indicators Lamp Replace IndicatorOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowTurning on / OFF Projector Lamp modeBasic Operation Turning on ProjectorKeystone Adjustment Adjusting ScreenFocus Adjustment Picture Freeze FunctionBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationRGB Scart RGB Digital RGB Analog Selecting Input SourceRGB Input MenuSelect Computer System Manually Selecting Computer SystemComputer Input SvgaFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Level Select Menu Picture Image AdjustmentsImage Level Select Direct Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System AV System Menu Video or S-VIDEOCinema Image button Standard CinemaVideo Input Image Level Adjustment Reset all adjustment to their previous figure Setting Menu SettingSetting Menu To change the code of the Remote Control To change the code of the ProjectorAppendix Lamp ReplacementReset the Lamp Replace Counter Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterInstallation Operating Wireless MouseOperating Wireless Mouse Cleaning Projection Lens MaintenanceAIR Filter Care and Cleaning TOP ControlTroubleshooting Not work Remote Control doesWireless Mouse Function does notIndicators Projector Condition Appendix Indicators and Projector ConditionTechnical Specifications Computer INPUT/MONITOR Output Terminal Analog Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration DVI-I Terminal DIGITAL/ANALOGOptional Parts Key to better communications Canada