Eiki LC-NB2UW Problem Try these Solution No power, Image is out, Focus, Picture is Left/Right

Page 35

LC-NB2UW

Before calling your dealer or service station for assistance, check the matters below once again.

1.Make sure you have connected the projector to your equipment a s described in section “CONNECTING THE PROJECTOR” on pages 10 ‘~ 13.

2.Check cable connection. Verify that all computer, video and power cord are properly connected.

3.Verify that all power is switched on.

4.If the projector still does not produce the image, re-start the computer.

5.If the image sill does not appear, unplug the projector from the computer and check the computer monitor’s display. The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector, remember to turn the computer and monitor off before your power up the projector. Power the equipment back in order of: Projector and computer.)

6.If the problem still exists, check with following chart.

Problem:

Try these Solution

 

No power.

• Plug the projector into the AC outlet.

 

 

• Be sure READY Indicator light is On.

 

 

• Wait 90 seconds after the projector is turned OFF before turning the projector back

on.

 

NOTE :After pressing the power ON-OFF switch to OFF, make sure the projector works as

 

follow.

 

 

1.The LAMP indicator will light and the READY indicator will turn off.

 

 

2.After 90 seconds, the READY indicator will light green again and the

 

 

projector may be turned on by pressing the power ON-OFF button.

 

 

• Check the TEMPERATURE WARNING indicator. If the indicator flashes red, the

 

 

projector cannot be turned on.

 

 

(See “TURNING ON/OFF THE PROJECTOR” section on page 19.)

 

 

• Check the Projection Lamp. (Refer to the page 34.)

 

 

 

 

Image is out of

• Adjust the focus

 

focus

• Make sure the projection screen is at least 4.6’ (1 .4m) from the projector.

 

 

• Check the projection lens to see if it needs cleaning.

 

 

NOTE :Moving the projector from a cool temperature location to a warm temperature location

 

may result in moisture condensation on the lens. In such an event, leave

 

 

the projector OFF an d wait until condensation disappears.

 

Picture is Left/Right

• Check Ceiling / Rear feature. (See “SETTING” section on page 31.)

 

reversed.

 

 

Picture is

• Check Ceiling feature. (See “SETTING” section on page 31.)

 

Top/Bottom

 

 

reversed.

 

 

Some displays are

• Check Display feature.(See “SETTING” section on page 31.)

 

not seen during the

 

 

Operation.

 

 

No image.

• Check the connection between the computer or video equipment and the projector.

 

• When turning the projector on, it is about 30 seconds to display the image.

 

 

• Check the system that you select is corresponding with the computer or the video

 

equipment.

 

 

• Make sure the temperature is not out of the Operating Temperature (5°C — 35°C).

No sound.

• Check audio cable connection from audio input source.

 

 

• Adjust the audio source.

 

 

• Press VOLUME (+) button.

 

 

• Press MUTE button.

 

 

 

 

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Model LC- NB2UW Safety Precautions Important Safety Instructions Table of Contents Features and Design LC-NB2UW Room Light Positioning the ProjectorVentilation Connecting the AC Power CordMoving the Projector Terminal DIN 8-PIN Connecting the ProjectorTerminal HDB15-PIN LC-NB2UW Cables Used For Connections LC-NB2UW LC-NB2UW LC-NB2UW LC-NB2UW Display ON-SCREEN Menu HOW to OP Rate ON-SCREEN MenuControl and adjust through ON-SCREEN Menu Flow of ON-SCREEN MenuLC-NB2UW Turning OFF the Projector Turning of the ProjectorLC-NB2UW Picture Freeze Function Sound Volume AdjustmentSound Mute Adjustment No Show FunctionMenu Operation Select Computer Mode ManuallyGo to PC adj No signal Direct OperationKHz Compatible Computer SpecificationsFreq LC-NB2UW Horizontal / Vertical Mode free Stored QuitTotal lines Total dotsNormal Function Adjust Picture Image ManuallyPosition Auto Image FunctionExpand function TrueKeystone Digital zoomWide AutoRegular Sharpness ColorTint White balance Red / Green I BlueLC-NB2UW Select Left Click button InstallationOperating Wireless Mouse Point buttonAIR Filter Care and Cleaning Temperature Warning IndicatorLamp Replacement Lamp Replacement IndicatorPicture is Left/Right Problem Try these Solution No powerImage is out FocusUnits. Maximum operating range is 16.4’ 5m Control UnitsHorizontal Resolution Dimensions W x H x DNet Weight Panel ResolutionOptional Parts Eiki INTERNATIONAL, INC
Related manuals
Manual 39 pages 34.06 Kb

LC-NB2UW specifications

The Eiki LC-NB2UW is a versatile and high-performance portable projector designed to meet the needs of various presentation environments, from small meeting rooms to large lecture halls. This advanced projector integrates cutting-edge technologies to deliver brilliant image quality, making it a reliable tool for educators, business professionals, and event organizers alike.

One of the main features of the Eiki LC-NB2UW is its impressive brightness level, boasting up to 3,600 ANSI lumens. This high brightness ensures clear visibility even in well-lit rooms, allowing presenters to deliver their messages effectively without being hindered by ambient lighting. Coupled with a native resolution of WUXGA (1920 x 1200), the projector offers stunning visuals with sharp details and vibrant colors, making images, videos, and presentations truly stand out.

The Eiki LC-NB2UW utilizes DLP (Digital Light Processing) technology, which enhances picture quality by providing high contrast ratios and rich color reproduction. This technology also contributes to the longevity of the projector, as it is known for its durability and resistance to color decay over time. Users can expect consistent and reliable performance without worrying about image degradation.

Another notable characteristic of the Eiki LC-NB2UW is its comprehensive connectivity options. The projector is equipped with multiple input interfaces, including HDMI, VGA, and USB ports, allowing seamless integration with various devices such as laptops, Blu-ray players, and streaming devices. This versatility makes it easy to switch between different media sources during presentations, accommodating diverse content formats.

Additionally, the Eiki LC-NB2UW features built-in speakers, optimizing the audio experience for presentations without the need for external sound systems. This feature is particularly beneficial for users who require an all-in-one solution for conveying information effectively.

Weighing just around 5.5 pounds, the Eiki LC-NB2UW is designed for portability, making it easy to transport between different venues. Its compact size and lightweight design enable users to set up impromptu presentations with minimal fuss.

In summary, the Eiki LC-NB2UW is an exceptional choice for anyone looking for a reliable and high-quality portable projector. With its impressive brightness, outstanding resolution, versatile connectivity options, and portable design, it proves to be an essential tool for effective communication in various professional settings.
Top Page Image Contents