CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly.
|
| AUDIO INPUT JACKS | VIDEO INPUT JACKS | ||
Connect the | Connect the audio output | Connect the composite video | |||
output from video | from video equipment to | output from video equipment | |||
equipment to | this | these jacks. |
| to VIDEO/Y jack or connect | |
jack. (Refer to P12.) | (Refer to P12.) |
| the component video outputs | ||
|
| ● When the audio output | to VIDEO/Y, Pb/Cb and | ||
|
|
| is monaural, connect it | Pr/Cr jacks. (Refer to P12.) | |
|
|
| to L (MONO) jack. |
| |
COMPUTER IN |
| VIDEO |
|
| |
DIGITAL | R – AUDIO IN – L (MONO) Y – | Pb / Cb – Pr / Cr |
| ||
| S – VIDEO | AUDIO IN | R – AUDIO OUT – L | ||
|
|
| COMPUTER |
| RESET |
MCI |
|
|
|
|
|
|
|
| COMPUTER IN | USB | CONTROL PORT |
|
|
| ANALOG | ||
|
|
|
|
| |
AUDIO OUTPUT JACKS
Connect an external audio amplifier to these jacks.
(Refer to P12, 13.)
RESET BUTTON
This projector uses a micro processor to control this unit, and occasionally, this micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart the unit. Do not use RESET function excessively.
CONTROL PORT CONNECTOR
When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P13.)
COMPUTER INPUT |
| COMPUTER AUDIO |
TERMINALS (DIGITAL/ANALOG) |
| INPUT JACK |
Connect the computer | Connect the audio output | |
(digital/analog) output to | (stereo) from computer to | |
one of these terminals. | this jack. (Refer to P13.) | |
(Refer to P13.) |
| |
✽Do not press this button. This button is used for our optional accessories.
USB CONNECTOR (Series B)
When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P13.)
11