Eiki LC-XB42N owner manual Standby mode, Power management

Page 52

Setting

Standby mode

This function is available when operating the projector via network.

Normal........ Supply the power to the network function even

after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco............. Select “Eco” when you do not use the projector

via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual “Network Set-up and Operation”.

Note:

When selecting Normal, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.

If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off. Use the Point ◄► buttons to set the countdown timer.

Select one of the following options:

Ready

When the lamp has been fully cooled down,

 

the POWER indicator changes to green

 

blinking. In this condition, the projection

 

lamp will be turned on if the input signal

 

is reconnected or any button on the top

 

control or remote control is pressed.

Shut down

When the lamp has been fully cooled down,

 

the power will be turned off.

Off

Power management function is off.

Note:

• Factory default is "Ready: 5 min.".

Power management

Time left before Lamp is off.

Press the SELECT button at Power management and this dialog box appears. Use the Point ◄► buttons to choose one of the three options. Press the Point button to select the timer, and then use the Point ◄► buttons to set timer.

52

Image 52
Contents Network Supported Memory ViewerPage Features and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Moving the ProjectorPositioning Precautions Bottom Front Downward Upward UsualAC Power Cord Requirement AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom CompliancePart Names and Functions BottomPart Names and Functions ⑬ SD Card Indicator⑦ LAN Connection Terminal ① Lamp Replace indicator ⑤ Point Volume +/- buttons⑦ Warning indicator ⑧ Power indicatorPart Names and Functions Remote Control ⑤ ④ ③Pointer Function Part Names and Functions Laser Pointer FunctionSpotlight Pointer Part Names and Functions Wireless Mouse Operation Remote Control CodeRemote Control Operating Range Adjustable FeetInstallation Positioning the ProjectorProjector side AC outlet side Installation Connecting the AC Power CordFor Continental Europe For the U..K Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment What is PIN code? Basic OperationTurning On the Projector Enter a PIN codeBasic Operation Turning Off the Projector Basic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuFor computer source Basic Operation Menu BarFor video source Auto Setup Function Basic Operation Zoom and Focus AdjustmentKeystone Correction Direct Operation Basic Operation Sound AdjustmentMenu Operation Basic Operation Remote Control Operation Timer button Basic OperationNo Show button Image buttonComputer Input Input Source Selection RGB Computer 1 Analog/ComputerNotes Input MenuTop Control Selecting Computer System Manually Computer Input Computer System SelectionPC System Menu Computer Input Auto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjComputer Input Manual PC Adjustment To store adjusted data To clear adjusted data parametersComputer Input Computer Input Image Mode Selection Image Select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuFor zooming in and out the images CustomDigital zoom + Digital zoomVideo Input Input Source Selection Video, S-videoAuto VideoInput Source Selection Component, RGB Scart 21-pin Video InputComponent RGB Scart NoteVideo Input Video System Selection Video or S-VideoAV System Menu Video or S-Video ComponentCinema Video Input Image Mode SelectionImage1-4 Color Video Input Image AdjustmentTint Noise reduction ProgressiveVideo Input Screen Size Adjustment Setting SettingSetting Menu Language Auto setupBlue back KeystoneKeystoneDisplay Logo Logo and Logo PIN code lock settings Logo select CaptureLogo select CaptureEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Ceiling Rear CeilingRear Input searchStandby mode Power managementRemote control To change the code for the remote controlPointer On startKey lock PIN code lockPIN code lockSecurity Key lock and PIN code lock Key lockChange the PIN code lock setting Change the PIN code lock settingChange the PIN code Enter a PIN codeFan Fan Control Setting FanFan control Lamp counterFactory default Factory defaultFilter counter Filter counterMaintenance and Cleaning Indicator is blinking redIndicator lights red Projector is shut down and the WarningMaintenance and Cleaning Cleaning the Filters Resetting the Filter CounterCleaning the Projection Lens Maintenance and Cleaning Slide ShutterCleaning the Projector Cabinet Reset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 333 Lamp Handling Precautions Maintenance and Cleaning Resetting the Lamp CounterTroubleshooting AppendixAppendix Remote Control does Indicator blinks or lightsWireless Mouse function does Image is distorted or runs offAppendix Appendix Menu Tree Computer Input/Video InputSound Computer InputSetting Video InputAppendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionSXGA1 Appendix Technical Specifications Accessories Optional PartsModel No COMPONENT~VGA Cable AH-98771 SCART~VGA Cable AH-98881Appendix PJ Link Notice Appendix Configurations of Terminals USB Connector Series BTerminal Analog RGB Mini D-sub 15 pin Terminal Mini DIN 8-PINPIN Code Lock No Appendix PIN Code Number MemoLogo PIN Code Lock No Appendix Dimensions Deutschland & Österreich ChinaCanada Eastern Europe

LC-XB42N specifications

The Eiki LC-XB42N is a high-performance LCD projector that stands out in the realm of presentation technology, making it an excellent choice for educational, business, and entertainment applications. This projector has been engineered to deliver sharp, vivid images and superior reliability, catering to a wide range of user needs.

One of the prominent features of the Eiki LC-XB42N is its impressive brightness level of 4,200 ANSI lumens. This high brightness allows for clear presentations even in well-lit environments, ensuring that your content is easily visible to all attendees. The projector also boasts a native XGA resolution of 1024 x 768 pixels, providing a good balance between clarity and image detail, which is particularly beneficial when displaying detailed graphs, charts, or text.

Color reproduction is another essential aspect of the Eiki LC-XB42N. It uses a three-chip LCD technology that produces vibrant and accurate colors across the spectrum. The added benefit is the projector's compatibility with a wide range of color spaces, enabling it to deliver presentations that captivate audiences with rich, lifelike imagery.

The Eiki LC-XB42N also comes equipped with a multitude of connectivity options, including HDMI, VGA, and audio inputs, allowing for seamless integration with various devices such as laptops, tablets, and media players. This versatility ensures that users can easily switch between different sources during their presentations without any fuss. Moreover, it supports both analog and digital formats, which is ideal for diverse technological environments.

Another significant characteristic of the Eiki LC-XB42N is its lamp life of up to 5,000 hours in standard mode and up to 6,000 hours in eco mode. This longevity reduces the need for frequent lamp replacements, resulting in lower maintenance costs and increased productivity.

The portability of the Eiki LC-XB42N is enhanced by its compact design, making it easy to transport between different locations. This feature is particularly useful for professionals who need a reliable projector for various setups. Additionally, it includes features such as keystone adjustment and a zoom lens to provide flexibility in installation options.

In summary, the Eiki LC-XB42N is a versatile, high-brightness LCD projector that excels in various settings. With its robust features, impressive image quality, and flexibility in connectivity, it is an ideal solution for anyone looking to enhance their presentations. Whether for business meetings, educational purposes, or entertainment, this projector guarantees a professional experience.