Eiki LC-XB15 owner manual Lamp Replace Counter, When the lamp replace counter is reset, the Lamp

Page 44

Maintenance and Cleaning

Lamp Replace Counter

Be sure to reset the lamp replace counter after the lamp is replaced. REPLACE indicator stops lighting.

1

Turn the projector on, press the MENU button and the On-

 

Screen Menu will appear. Press the Point Left/Right button

 

to move the red frame pointer to the Setting Menu icon.

2

Press the Point Down button to move the red frame pointer

 

to the Lamp counter reset item and then press the SELECT

 

button. The message "Lamp replace counter Reset?" is

 

displayed. Move the pointer to [Yes] and then press the

 

SELECT button.

3

Another confirmation dialog box appears and select [Yes] to

 

reset the Lamp replace counter.

NOTE

●Do not reset the Lamp replace counter without implementation of lamp replacement. Be sure to reset the Lamp replace counter only after replacing the lamp.

When the lamp replace counter is reset, the LAMP

Move the pointer to Lamp counter reset and then press the SELECT button. The message “Lamp replace counter Reset?” is displayed.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Model LC-XB15 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorCompliance Federal Communication Commission NoticeCompliance For Continental EuropeFor the U.S.A. and Canada 200 240 V ACFeatures and Design Part Names and Functions FrontBack BottomPart Names and Functions TerminalPower ON-OFF button TopRemote Control Signal Emission indicatorLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationPositioning the Projector InstallationAdjustable Feet Installation Connecting to a ComputerProjector Connecting to Video EquipmentTerminals Turning Off the Projector Basic OperationTurning On the Projector Zoom Adjustment Focus AdjustmentKeystone Adjustment Basic OperationTimer Function Sound AdjustmentNo Show Function Direct OperationRemote Control On-Screen MenuTop Control On-Screen MenuMenu Bar Computer Input Input Source SelectionComputer Input Computer System SelectionAuto ModeAuto PC Adj Computer Adjustment AutoTo store adjustment data Computer Adjustment Manual Reset Mode freeDisplay area To store adjustment data To clear adjustment dataImage Level Selection StandardReal Image button Standard RealImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Video AutoVideo Input Input Source Selection Component, RGB Scart 21-PinComponent RGB ScartVideo System Selection Video or S-VideoAV System Menu Video or S-Video AV System Menu ComponentCinema Image button Standard CinemaProgressive ColorTint Resets all adjustment to their previous figure Setting SettingSetting To change the code for the remote control To change the code for the projectorThen check the items below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterWhen the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixAppendix Indicators and Projector Condition Projector ConditionPC Adjust Image Select Image Adjust ScreenMenu Tree Input575pSetting Image SelectKHz Compatible Computer SpecificationsFreq Technical Specifications Terminal DVI-I Pin Configuration Configurations of TerminalsTerminal HDB15-PIN Pin Configuration USB Connector Series B Optional PartsMAC Adapter Type No DVI Cable Type NoAttaching the Lens Cover Page Key to better communications Canada

LC-XB15 specifications

The Eiki LC-XB15 is a versatile and reliable LCD projector that caters to various presentation needs, making it an excellent choice for educational institutions, corporate environments, and event venues. With its compact design and robust features, the LC-XB15 ensures that presentations are both impactful and engaging.

One of the standout features of the Eiki LC-XB15 is its impressive brightness rating of 3,500 lumens, allowing it to deliver clear and vibrant images, even in well-lit settings. This makes it particularly suitable for larger rooms or environments where ambient light is a factor. The projector's native XGA resolution of 1024 x 768 pixels ensures that text and images are sharp and easy to read, enhancing the overall viewer experience.

In terms of technology, the LC-XB15 employs advanced 3LCD technology, which provides excellent color accuracy and vibrant image quality. With a color brightness of 3,500 lumens, the projector produces vivid colors that maintain their integrity even in challenging lighting conditions. The projector also boasts a contrast ratio of 3,000:1, providing deeper blacks and more defined color palettes, which adds depth to presentations.

Connectivity is another strength of the Eiki LC-XB15. It offers multiple input options, including HDMI, VGA, and a composite video port, allowing for flexible connection to various devices, such as laptops, DVD players, and document cameras. The projector is also equipped with an RS-232 port for remote control and integration into more extensive AV systems, making it a practical choice for installation environments.

The Eiki LC-XB15 is designed for ease of use, featuring a straightforward user interface and straightforward setup procedures. The lens offers a 1.2x optical zoom, enabling users to adjust image sizes without moving the projector. The built-in speaker delivers decent audio quality for smaller presentations, eliminating the need for additional sound equipment in less critical settings.

Additionally, the LC-XB15 has a long lamp life of approximately 5,000 hours in standard mode, which can be extended further in eco mode. This feature not only reduces maintenance costs but also minimizes downtime, ensuring consistent use for various applications.

In conclusion, the Eiki LC-XB15 stands out as a reliable and feature-rich projector that meets the needs of a diverse user base. Its combination of brightness, color accuracy, and user-friendly design makes it a valuable tool for enhancing presentations in any setting. Whether for educational purposes, business meetings, or events, the LC-XB15 proves to be an effective solution for impactful visual communication.
Top Page Image Contents