Eiki LC-X986 instruction manual Preparation, Name of Each Part of Projector

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET

TOP CONTROLS

AND INDICATORS

INFRARED

REMOTE RECEIVER

PROJECTION LENS

			AIR INTAKE
			VENT
LENS CAP	SPEAKERS
BACK OF CABINET	POWER CORD	TERMINALS	INFRARED
EXHAUST VENT	CONNECTOR	AND CONNECTORS	REMOTE RECEIVER

HOT AIR EXHAUSTED !

Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken.

●Do not put a flammable object near this vent.

●Keep rear grills at least 3’(1 m) away from any object, especially heat-sensitive object.

●Do not touch this area, especially screws and metallic parts. This area will become hot while a projector is used.

This projector detects internal temperature and automatically controls operating power of Cooling Fans.

BOTTOM OF CABINET

CARRYING

HANDLE

LAMP COVER

When attached the Pj-to NetDirector (optional part) to the projector, remove the these parts. Refer to the owner's manual in the optional Pj-to NetDirector.

AIR INTAKE VENTS

This projector is equipped with cooling fans for protection from overheating. Pay attention to following to ensure proper ventilation and avoid a possible risk of fire and malfunction.

●Do not cover vent slots.

●Keep side clear of any objects. Obstructions may block cooling air.

ADJUSTABLE FEET

AND

FEET LOCK LATCHES

7