Eiki LC-SM3 Appendix, Maintenance, AIR Filter Care and Cleaning, Cleaning Projection Lens

Page 37

APPENDIX

MAINTENANCE

WARNING TEMP. INDICATOR

WARNING TEMP. Indicator flashes red when an internal temperature of a projector exceeds the normal temperature. This Indicator stops flashing when the temperature of a projector returns to normal.

When WARNING TEMP. Indicator continues to flash, check the items listed below.

1

Ventilation Slots of the projector may be blocked. In such an event, reposition the projector so that Ventilation Slots

are not obstructed.

2

Air Filters may be clogged with dust particles. Clean Air Filters by following the section AIR FILTER CARE AND

CLEANING below.

3

If WARNING TEMP. Indicator remains on after performing the above checks, Cooling Fans or the Internal Circuits may

be malfunctioning. Contact service personnel from an authorized dealer or a service station.

AIR FILTER CARE AND CLEANING

Removable Air Filters prevent dust from accumulating on the surface of Projection Lens and Projection Mirror. Should Air Filters become clogged with dust particles, it will reduce Cooling Fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean Air Filters following the steps below:

1

Turn off the projector, and disconnect AC power cord from the

 

AC outlet.

2

Turn the projector upside down and remove two Air Filters

 

(Large and Small) by pulling the latches upward.

3

Clean Air Filters with a brush or wash out dust and particles.

4

Replace each Air Filter properly. Make sure that Air Filters are

 

fully inserted.

CAUTION

Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of the projector.

AIR FILTER (Small)

AIR FILTER (Large)

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. This condition may degrade the quality of a projected image.

When the above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean Projection Lens:

1

Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

 

Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.

2

3

Lightly wipe lens surface with a cleaning cloth.

When the projector is not in use, replace Lens Cap.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Model LC-SM3 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design One-Touch Auto PC Adjustment Features and DesignName of Each Part of Projector PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP ProjectorFor Continental Europe Preparation Positioning Projector Adjustable FeetRoom Light Preparation Moving Projector USB Connector Series B Connecting ProjectorTerminals of Projector ComputerTerminals Projector Connecting to ComputerAudio Video Connecting to Video EquipmentBefore Operation Operation of Remote ControlBattery Remote Control Battery InstallationBefore Operation Operating Range Lamp Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorZoom Adjustment Adjusting ScreenFocus Adjustment Keystone AdjustmentTimer Function Sound AdjustmentBasic Operation No Show Function Direct OperationSelecting Input Source Computer InputSelecting Computer System Select Computer System ManuallyResolution Computer Input Compatible Computer SpecificationsFreq KHzAuto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Level Select Direct Picture Image AdjustmentImage Level Select Menu Image Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input Auto Selecting Video SystemAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu Power management To change the code of the Remote Control UnitRemote control Lamp counter resetAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens AppendixLamp Replace Counter Appendix Lamp ReplacementTroubleshooting Does not work Remote Control UnitOptional Parts Control Port Connector Appendix Configurations of the TerminalsUSB Connector Series B Computer Input Terminal AnalogPage Key to better communications Canada

LC-SM3 specifications

The Eiki LC-SM3 is a sophisticated multimedia projector designed to meet the demands of both professional and educational settings. Renowned for its robust performance and versatile features, the LC-SM3 stands out in the landscape of projection technology.

One of the key characteristics of the Eiki LC-SM3 is its impressive brightness. With a light output of up to 5,000 ANSI lumens, this projector ensures clear and vibrant image quality, even in well-lit environments. This makes it ideal for large venues such as lecture halls, conference rooms, and auditoriums, where ambient light can be challenging.

Resolution-wise, the LC-SM3 boasts a native XGA (1024 x 768) resolution, delivering sharp images suitable for presentations, videos, and graphics. The projector's advanced technology enhances image clarity and detail, making it an excellent choice for displaying detailed charts, graphs, and images during business meetings or educational lectures.

Another noteworthy aspect of the Eiki LC-SM3 is its array of connectivity options. It is equipped with multiple input ports, including HDMI, VGA, and component video, allowing seamless integration with a variety of devices such as laptops, gaming consoles, and media players. This connectivity versatility ensures compatibility with a wide range of sources, enhancing the user experience.

In terms of technology, the LC-SM3 utilizes a powerful LCD projection system. This technology is renowned for its reliability and ability to produce bright, vivid colors, making images appear more lifelike. Furthermore, the projector incorporates advanced image processing capabilities, which contribute to enhanced video performance, reducing lag and maintaining smooth playback during dynamic presentations.

Additionally, the LC-SM3 is designed with user convenience in mind. It features a straightforward user interface, allowing quick setup and operation. The projector also includes a powerful built-in speaker, alleviating the need for external audio equipment in smaller settings.

Durability is another significant aspect of the Eiki LC-SM3. Built with high-quality materials, the projector is designed to withstand the rigors of frequent use, making it a reliable choice for institutions and businesses alike.

In summary, the Eiki LC-SM3 is a high-performance projector characterized by its brightness, resolution, connectivity options, and advanced LCD technology. Its combination of user-friendly features and reliable performance makes it an excellent choice for a wide range of professional applications.
Top Page Image Contents