Install additional
4 power supplies
If you purchased an additional power sup- ply, place it in one of the empty power supply bays at the top of the chassis.
1Loosen and remove the capture panel screws on the face plate of the power supply bay.
2Push the power supply into the power supply bay until the capture panel screws engage the chassis.
3Tighten the capture panel screws.
Install the
5 network modules
You can install network modules, such as the
1Remove the filler panels from any slots
2Push the module back until it connects with the backplane connector, and the capture panel screws engage the chassis.
3Tighten both capture panel screws simultaneously.
4Leave the filler panels in any unused slots. Doing so keeps dust out of the switch and helps maintain proper air- flow.
Capture Panel |
Screws |
Gigabit
Ethernet
Module
2