Safety Precautions

For your own safety please read the following instructions carefully before attempting to connect this unit to the mains.

•Check that the rear of your unit indicates the correct supply voltage.

•If your mains supply voltage is different, consult your dealer.

This unit is designed to operate only on the supply voltage and type that is indicated on the rear panel of the unit. Connecting to other power sources may damage the unit.

This equipment must be switched off when not in use and must not be used unless correctly earthed. To reduce the risk of electric shock, do not remove the unit’s cover (or back). There are no user serviceable parts inside. Refer servicing to qualified service personnel. If the power cord is fitted with a moulded mains plug the unit must not be used if the plastic fuse carrier is not in place. Should you lose the fuse carrier the correct part must be reordered from your Cambridge Audio dealer.

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the service literature relevant to this appliance.

This product complies with European Low Voltage (73/23/EEC) and Electromagnetic Compatibility (89/336/EEC) Directives when used according to this instruction manual. For continued compliance only Cambridge Audio accessories should be used with this product and servicing must be referred to qualified service personnel.

PLUG FITTING INSTRUCTIONS (UK ONLY)

The cord supplied with this appliance is factory fitted with a 13A mains plug fitted with a 3A fuse inside. If it is necessary to change the fuse, it is important that a 3A one is used. If the plug needs to be changed because it is not suitable for your socket, or becomes damaged, it should be cut off and an appropriate plug fitted following the wiring instructions below. The plug must then be disposed of safely, as insertion into a 13A socket is likely to cause an electrical hazard. Should it be necessary to fit a 3-pin BS mains plug to the power cord the wires should be fitted as shown in this diagram. The colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug. Connect them as follows:-

•The wire which is coloured BLUE must be connected to the terminal which is marked with the letter ‘N’ or coloured

BLACK.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter ‘L’ or coloured

RED

• The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked with the letter ‘E’ or coloured GREEN.

NOTE: If your model does not have an earth wire, then disregard this instruction.

If a 13 Amp (BS 1363) plug is used, a 3 Amp fuse must be fitted, or if any other type of plug is used a 3 Amp or 5 Amp fuse must be fitted, either in the plug or adaptor, or on the distribution board.

DAB500 specifications

The Cambridge Audio DAB500 is a high-quality digital audio receiver designed to meet the needs of modern music enthusiasts. Renowned for its exceptional performance and user-friendly interface, the DAB500 brings the latest in digital audio technology to your listening experience.

One of the standout features of the DAB500 is its DAB+ and FM radio capabilities. The DAB+ functionality allows listeners to access a wide range of digital radio stations with superior sound quality and less interference compared to traditional analog FM broadcasts. This ensures an improved listening experience, providing listeners with more choices and clearer reception. The DAB500 also includes a built-in FM tuner for those who wish to enjoy their favorite FM stations.

The user interface of the DAB500 is intuitive and straightforward. It is equipped with an easy-to-read LCD display, providing essential information such as station names, signal strength, and track information. The control buttons are thoughtfully positioned, allowing for effortless navigation through menus and settings. This makes it ideal for both tech-savvy users and those who prefer a simpler approach to their audio devices.

Sound quality is paramount for Cambridge Audio, and the DAB500 does not disappoint. It features high-quality digital-to-analog converters that deliver detailed sound reproduction, ensuring that every note is rendered with precision. The receiver is designed to minimize distortion and maximize clarity, allowing listeners to enjoy the full depth of their favorite tracks.

In addition to its radio capabilities, the DAB500 is equipped with multiple input options, including auxiliary inputs, USB connectivity, and Bluetooth capability. This versatility allows users to connect various devices, such as smartphones and tablets, enabling streaming of their favorite playlists and podcasts directly to the receiver. The inclusion of Bluetooth technology means that users can enjoy a wireless experience, making it easy to share music without the hassle of cables.

Furthermore, the compact design of the DAB500 means it can fit seamlessly into any living space. Its sleek aesthetic and high-quality build give it a premium feel, making it an attractive addition to any home audio setup.

In summary, the Cambridge Audio DAB500 combines advanced digital radio technology with exceptional sound quality and a user-friendly design. With DAB+ and FM reception, versatile connectivity options, and a commitment to audio fidelity, the DAB500 stands out as a top choice for anyone looking to enhance their listening experience. Whether you’re tuning into your favorite station or streaming from your personal library, the DAB500 offers an unparalleled audio experience.